Publications 1979 2017

  • 15 h-Index
  • 114 Conference contribution
  • 62 Article
  • 8 Chapter
Filter
Conference contribution
2015
2 Citations

A control-oriented jet ignition combustion model for an SI engine

Song, R., Gentz, G., Zhu, G., Toulson, E. & Schock, H. 2015 Adaptive and Intelligent Systems Control; Advances in Control Design Methods; Advances in Non-Linear and Optimal Control; Advances in Robotics; Advances in Wind Energy Systems; Aerospace Applications; Aerospace Power Optimization; Assistive Robotics; Automotive 2: Hybrid Electric Vehicles; Automotive 3: Internal Combustion Engines; Automotive Engine Control; Battery Management; Bio Engineering Applications; Biomed and Neural Systems; Connected Vehicles; Control of Robotic Systems. American Society of Mechanical Engineers, Vol. 1

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Combustion chambers
Ignition
Gases
Electric sparks
Engines
4 Citations

Modeling of Piston Ring-Cylinder Bore-Piston Groove Contact

Cheng, C., Kharazmi, A. & Schock, H. Apr 14 2015 SAE Technical Papers. April ed. SAE International, Vol. 2015-April

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Piston rings
Thermal load
Pistons
Boundary conditions
Finite element method
2014
2 Citations

Piston ring and groove side wear analysis for diesel engines

Poort, M., Cheng, C., Richardson, D. & Schock, H. 2014 ASME 2014 Internal Combustion Engine Division Fall Technical Conference, ICEF 2014. Web Portal ASME (American Society of Mechanical Engineers), Vol. 2

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Piston rings
Pressure distribution
Infiltration
Diesel engines
Pistons
2 Citations

The dynamics of second ring flutter and collapse in modern diesel engines

Cheng, C., Schock, H. & Richardson, D. 2014 ASME 2014 Internal Combustion Engine Division Fall Technical Conference, ICEF 2014. Web Portal ASME (American Society of Mechanical Engineers), Vol. 2

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engines
Diesel engines
Piston rings
Flow of gases
4 Citations

The Effect of Fuel Injection Pressure on Spray and Combustion Characteristics in a Gasoline Direct-Injection Engine

Mittal, M. & Schock, H. Oct 13 2014 SAE Technical Papers. SAE International, Vol. 2014-October

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fuel injection
Visualization
Direct injection
Engine cylinders
Gasoline
2 Citations

Three dimensional piston ring-cylinder bore contact modeling

Cheng, C., Kharazmi, A., Schock, H., Winel, R. & Brombolich, L. 2014 ASME 2014 Internal Combustion Engine Division Fall Technical Conference, ICEF 2014. Web Portal ASME (American Society of Mechanical Engineers), Vol. 2

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Piston rings
Internal combustion engines
Systems analysis
Engine cylinders
Thermal load
2013

Establishment of a database by conducting intake manifold and in-cylinder flow measurements inside an internal combustion engine assembly

Mittal, M., Schock, H., Vedula, R. & Naguib, A. 2013 SAE Technical Papers. Vol. 2

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Internal combustion engines
Flow measurement
Engine cylinders
Pressure measurement
Velocity measurement
2 Citations

Numerical simulations of turbulent sprays with a multicomponent evaporation model

Srivastava, S., Schock, H. & Jaberi, F. 2013 SAE Technical Papers. Vol. 2

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Large eddy simulation
Gases
Temperature
Evaporation
Finite volume method
2012
1 Citations

In-cylinder combustion visualization of a direct-injection spark-ignition engine with different operating conditions and fuels

Mittal, M., Schock, H. & Zhu, G. 2012 SAE Technical Papers. Vol. 9

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engine cylinders
Gasoline
Fuel injection
Visualization
Direct injection
1 Citations

Optical diagnostic combustion comparisons of pump diesel with bio-derived diesel blends in an optical di diesel engine

Squibb, C. W., Schock, H., Allen, C., Lee, T., Poort, M. & Crayne, K. 2012 SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Soot
Biodiesel
Diesel fuels
Diesel engines
Pumps
22 Citations

Spark ignition and pre-chamber turbulent jet ignition combustion visualization

Attard, W. P., Toulson, E., Huisjen, A., Chen, X., Zhu, G. & Schock, H. 2012 SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ignition
Electric sparks
Internal combustion engines
Natural gas
Visualization
4 Citations

Visualization of propane and natural gas spark ignition and turbulent jet ignition combustion

Toulson, E., Huisjen, A., Chen, X., Squibb, C., Zhu, G., Schock, H. & Attard, W. P. 2012 SAE Technical Papers. Vol. 4

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ignition
Electric sparks
Propane
Natural gas
Ignition systems
2011

A demonstration of simultaneous infrared and visible imaging techniques with pressure data in an optically accessible diesel engine operating at part load with high EGR

Squibb, C. W., Schock, H., Stuecken, T., Poort, M., Crayne, K., Gray, C. & Hamady, F. 2011 SAE 2011 World Congress and Exhibition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Infrared radiation
Imaging techniques
Engines
Experiments
Diesel engines
3 Citations

A demonstration of simultaneous infrared and visible imaging techniques with pressure data in an optically accessible diesel engine operating at part load with high EGR

Squibb, C. W., Schock, H., Stuecken, T., Poort, M., Crayne, K., Gray, C. & Hamady, F. 2011 SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Infrared radiation
Imaging techniques
Engines
Experiments
Diesel engines
1 Citations

Novel lead telluride based thermoelectric materials

Wu, C. I., Girard, S. N., Sootsman, J., Timm, E., Case, E. D., Kanatzidis, M. G., Schock, H., Chung, D. Y. & Hogan, T. P. 2011 Materials Research Society Symposium Proceedings. Vol. 1314, p. 63-69 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Traffic Accidents
thermal conductivity
fabrication
Accessory Nerve
Joint Loose Bodies
2 Citations

The effect of piston bowl and spray configuration on diesel combustion and emissions

Ramadan, B. H., Gray, C. L., Hamady, F. J., Squibb, C. & Schock, H. J. 2011 American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE. p. 905-919 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pistons
Air
Computational fluid dynamics
Experiments
Spray nozzles
2010
51 Citations

A review of pre-chamber initiated jet ignition combustion systems

Toulson, E., Schock, H. J. & Attard, W. P. 2010 SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ignition systems
Internal combustion engines
Ignition
10 Citations

A study of fuel impingement analysis on in-cylinder surfaces in a direct-injection spark-ignition engine with gasoline and ethanol-gasoline blended fuels

Mittal, M., Hung, D. L. S., Zhu, G. & Schock, H. 2010 SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gasoline
Engine cylinders
Ethanol fuels
Direct injection
Internal combustion engines
1 Citations

Effects of pre-injection on combustion characteristics of a single-cylinder diesel engine

Mittal, M., Zhu, G., Stuecken, T. & Schock, H. J. 2010 ASME International Mechanical Engineering Congress and Exposition, Proceedings. American Society of Mechanical Engineers (ASME), Vol. 3, p. 231-237 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engines
Diesel engines
Combustion knock
Rails
Fuel systems

Thermoelectric conversion of waste heat to electricity in an IC engine powered vehicle

Schock, H., Caillet, T., Case, E., Fleurial, J. P., Hogan, T., Lyle, M., Maloney, R., Moran, K., Ruckle, T., Sakamoto, J., Sheridan, T., Shih, T., Thompson, T., Timm, E., Zhang, L. & Zhu, G. 2010 Global Powertrain Congress 2010, GPC 2010 TROY - Proceedings. Vol. 59, p. 258-283 26 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Trucks
Waste heat
Hot pressing
Ingots
Electricity
1 Citations

Thermoelectric generators made with novel lead telluride based materials

Wu, C. I., Girard, S. N., Sootsman, J., Timm, E., Ni, J., Schmidt, R., Kanatzidis, M. G., Schock, H., Case, E. D., Chung, D. Y. & Hogan, T. P. 2010 Materials Research Society Symposium Proceedings. Vol. 1218, p. 13-19 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

modules
Traffic Accidents
fabrication
lead tellurides
thermoelectric generators
2009
8 Citations

An iterative algorithm for model-based predictive control of an electro-pneumatic valve actuator

Zhu, G. G., Ma, J. & Schock, H. 2009 Proceedings of the American Control Conference. p. 2684-2689 6 p. 5159833

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pneumatics
Actuators
Engines
Throughput
Internal combustion engines
1 Citations

Burn rate analysis of an ethanol-gasoline, dual fueled, spark ignition engine

Mittal, M., Zhu, G., Schock, H. J., Stuecken, T. & Hung, D. L. S. 2009 ASME International Mechanical Engineering Congress and Exposition, Proceedings. Vol. 3, p. 3-11 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gasoline
Direct injection
Ethanol
Fuel injection
Internal combustion engines
1 Citations

Evaluating the influence of charge motion control on in-cylinder flow using MTV

Mittal, M., Schock, H. J. & Sadr, R. 2009 ASME International Mechanical Engineering Congress and Exposition, Proceedings. PART B ed. Vol. 10, p. 819-827 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion control
Velocity measurement
Engines
Flow measurement
Engine cylinders
6 Citations

Heat-transfer enhancement in thermoelectric-power generation

Hu, K. S. Y., Chi, X., Shih, T. & Schock, H. J. 2009 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. 2009-1210

Research output: Chapter in Book/Report/Conference proceedingConference contribution

heat transfer
Heat transfer
thermoelectric materials
gas
Thermal stress
1 Citations

Large eddy simulations of turbulent flows in ic engines

Banaeizadeh, A., Afshari, A., Schock, H. & Jaberif, F. 2009 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. PART A ed. Vol. 3, p. 399-407 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Large eddy simulation
Internal combustion engines
Pistons
Turbulent flow
Direct injection
6 Citations

Numerical simulation of a direct-injection spark-ignition engine with different fuels

Srivastava, S., Schock, H., Jaberi, F. & Hung, D. L. S. 2009 SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ethanol
Engines
Direct injection
Internal combustion engines
Gasoline

Thermoelectric conversion of waste heat to electricity in an IC engine powered vehicle

Schock, H., Case, E., Caillet, T., Cauchy, C., Fleurial, J. P., Hogan, T., Kanatzidis, M., Maloney, R., Nelson, C., Ni, J., Novak, J., Peng, F., Ruckle, T., Sakamoto, J., Schmidt, R., Shih, T., Timm, E. & Winkelman, J. 2009 Global Powertrain Congress 2009, GPC 2009 Troy - Proceedings. Vol. 54, p. 108-135 28 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engines
Fabrication
Recovery
Waste heat
Passenger cars
2008
1 Citations

Avenues for predicting piston wear: Employing 2D and 3D numerical piston dynamics models

Panayi, A. P. & Schock, J. S. 2008 SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pistons
Dynamic models
6 Citations

Combustion characteristics of a single-cylinder engine equipped with gasoline and ethanol dual-fuel systems

Zhu, G., Stuecken, T., Schock, H., Yang, X., Hung, D. L. S. & Fedewa, A. 2008 SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Direct injection
Fueling
Ethanol
Fuel injection
Gasoline
1 Citations

Electrical contact fabrication and measurements of metals and alloys to thermoelectric materials

D'Angelo, J. J., Timm, E. J., Ren, F., Hall, B. D., Case, E., Schock, H., Kanatzidis, M., Chung, D. Y. & Hogan, T. P. 2008 Materials Research Society Symposium Proceedings. Vol. 1044, p. 449-455 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

beta-Amylase
Traffic Accidents
fabrication
Fabrication
Acetanilides
6 Citations

Electro-pneumatic exhaust valve modeling and control for an internal combustion engine

Ma, J., Zhu, G., Stuecken, T., Hartsig, A. & Schock, H. 2008 Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division. p. 161-172 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pneumatics
Actuators
Plant shutdowns
Internal combustion engines
Engines

Investigations on piston secondary dynamics: A model that considers translation along the wrist-pin and second land interactions with the cylinder bore

Panayi, A. P. & Schock, H. J. 2008 ASME International Mechanical Engineering Congress and Exposition, Proceedings. Vol. 16, p. 3-15 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pistons
Contacts (fluid mechanics)
Hydrodynamics
2 Citations

Large eddy simulations of turbulent flows in IC engines

Banaeizadeh, A., Afshari, A., Schock, H. & Jaberi, F. 2008 Proceedings of the ASME Design Engineering Technical Conference. PARTS A AND B ed. Vol. 3, p. 399-407 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Large eddy simulation
Internal combustion engines
Internal combustion engine
Spray
Turbulent flow
8 Citations

Model-based predictive control of an electro-pneumatic exhaust valve for internal combustion engines

Ma, J., Zhu, G., Hartsig, A. & Schock, H. 2008 Proceedings of the American Control Conference. p. 298-305 8 p. 4586507

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pneumatics
Actuators
Internal combustion engines
Intake valves
Cams

Study on the fabrication and characterization of LAST and LASTT based thermoelectric generators

Wu, C. I., Timm, E. J., Ren, F., Hall, B. D., Ni, J., Downey, A., D'Angelo, J., Short, J., Schock, H., Case, E., Sootsman, J., Han, M. K., Kanatzidis, M., Chung, D. Y. & Hogan, T. P. 2008 Materials Research Society Symposium Proceedings. Vol. 1044, p. 441-447 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

modules
fabrication
Traffic Accidents
Acetanilides
beta-Amylase
2007
9 Citations

Adaptive control of a pneumatic valve actuator for an internal combustion engine

Jia, M., Guoming, Z., Schock, H. & Winkelman, J. 2007 Proceedings of the American Control Conference. p. 3678-3685 8 p. 4282267

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Identification (control systems)
Internal combustion engines
Pneumatics
Actuators
Cams
13 Citations

A high speed flow visualization study of fuel spray pattern effect on mixture formation in a low pressure direct injection gasoline engine

Hung, D. L. S., Zhu, G. G., Winkelman, J. R., Stuecken, T., Schock, H. & Fedewa, A. 2007 SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engines
Air
Direct injection
Fuel injection
Pistons
3 Citations

Investigations on piston secondary dynamics: A model that considers translation along the wrist-pin and second land interactions with the cylinder bore

Panayi, A. P. & Schock, H. J. 2007 ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). American Society of Mechanical Engineers (ASME), Vol. 16, p. 3-15 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pistons
Contacts (fluid mechanics)
Hydrodynamics
3 Citations

Model reference adaptive control of a pneumatic valve actuator for infinitely variable valve timing and lift

Ma, J., Stuecken, T., Schock, H., Zhu, G. & Winkelman, J. 2007 SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Model reference adaptive control
Pneumatics
Actuators
Adaptive control systems
Feedforward control
2006
12 Citations

Analysis and modeling of an electronically controlled pneumatic hydraulic valve for an automotive engine

Ma, J., Schock, H., Carlson, U., Hoglund, A. & Hedman, M. 2006 SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydraulics
Engines
Pneumatics
Actuators
Air
2 Citations

A numerical study of convective and radiative heat transfer between parallel plates connected by an array of rods

Zhu, B., Schock, H. S., Hogan, T. & Shih, T. I. P. 2006 Collection of Technical Papers - 44th AIAA Aerospace Sciences Meeting. Vol. 10, p. 6843-6854 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

heat transfer
rods
convection
Heat transfer
Temperature
6 Citations

Characterization of thermoelectric power generation Modules made from new materials

Short, J. L., D'Angelo, J., Downey, A. D., Pajor, M. A., Timm, E., Schock, H., Kanatzidis, M. G. & Hogan, T. P. 2006 Materials Research Society Symposium Proceedings. Vol. 886, p. 309-315 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Traffic Accidents
Glyceraldehyde-3-Phosphate Dehydrogenases
Power generation
Acetanilides
Temperature
7 Citations

Heat transfer and electric current flow in a thermoelectric couple

Harris, R., Hogan, T., Schock, H. J. & Shih, T. I. P. 2006 Collection of Technical Papers - 44th AIAA Aerospace Sciences Meeting. Vol. 10, p. 6855-6869 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Temperature
temperature
electric potential
Thermoelectric power
Electric currents
4 Citations

Investigation of low resistance contacts to Pb-Sb-Ag-Te (LAST) materials for module fabrication

D'Angelo, J., Short, J. L., Downey, A. D., Pajor, M. A., Hogan, T. P., Chung, D. Y., Kanatzidis, M. G., Timm, E. & Schock, H. 2006 Materials Research Society Symposium Proceedings. Vol. 886, p. 317-322 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

beta-Amylase
Fabrication
Traffic Accidents
Contact resistance
Antimony
1 Citations

Measurements of cycle to cycle variability of the inlet flow of fuel injectors using LDA

Bedford, J., Brereton, G., Schock, H. & Herrin, R. 2006 SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lasers
Experiments
Inlet flow
Fluid mechanics
Unsteady flow
1 Citations

Model for control of combustion in a piston engine

Bitar, E. Y., Oppenheim, A. K. & Schock, H. J. 2006 SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microelectronics
Engines
Feedback
Engine pistons
Governors
5 Citations

Parameterization and FEA approach for the assessment of piston characteristics

Panayi, A., Schock, H., Chui, B. K. & Ejakov, M. 2006 SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pistons
Finite element method
Elastohydrodynamic lubrication
Parameterization
Internal combustion engines
5 Citations

Piston finite element modeling for the estimation of hydrodynamic and contact forces and moments

Panayi, A. P. & Schock, H. J. 2006 American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE. Vol. 2006

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pistons
Contacts (fluid mechanics)
Hydrodynamics
Internal combustion engines
Computer aided design
2 Citations

Progress on the fabrication and characterization of high efficiency thermoelectric generators

Hogan, T. P., Downey, A. D., Short, J., D'Angelo, J., Quarez, E., Androulakis, J., Poudeu, P. F. P., Kanatzidis, M. G., Timm, E., Sarbo, K. & Schock, H. 2006 Materials Research Society Symposium Proceedings. Vol. 886, p. 487-492 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

beta-Amylase
Traffic Accidents
Fabrication
Fusobacterium
Acetanilides