Publications 1969 2013

  • 20 h-Index
  • 70 Article
  • 51 Conference contribution
  • 5 Chapter
Filter
Conference contribution
2013

Integrating risk assessment in the unit operations laboratory

Fanelli, M., Briedis, D., Miller, D. J. & Hawley, M. C. 2013 ASEE Annual Conference and Exposition, Conference Proceedings.

Research output: ResearchConference contribution

Risk assessment
Hazards
Students
Process design
Propionic acid
2009

Magneto-dielectric composites with frequency selective surface layers

Hawley, M., Farhat, S., Shanker, B. & Kempel, L. 2009 ICCM International Conferences on Composite Materials.

Research output: ResearchConference contribution

Frequency selective surfaces
Composite materials
Materials properties
Polymers
Fabrication
2007

Characterization of natural fiber surfaces

Sgriccia, N. & Hawley, M. C. 2007 ICCM International Conferences on Composite Materials.

Research output: ResearchConference contribution

Natural fibers
Composite materials
Silanes
Alkalies
Water

Synthesis and characterization of magneto-dielectric composites for radio frequency applications

Farhat, S., Hawley, M., Kempel, L. & Balasubramaniam, S. 2007 Materials Science and Technology Conference and Exhibition, MS and T'07 - "Exploring Structure, Processing, and Applications Across Multiple Materials Systems". Vol. 2, p. 838-844 7 p.

Research output: ResearchConference contribution

radio frequencies
composite materials
synthesis
Composite materials
iron oxides
2006

Design and synthesis of polymer nanocomposites for radio frequency applications

Farhat, S. A., Hawley, M. C., Balasubramaniam, S. & Kempel, L. C. 2006 American Society for Composites - 21st Technical Conference of the American Society for Composites 2006. Vol. 1, p. 518-527 10 p.

Research output: ResearchConference contribution

Nanocomposites
Polymers
Permittivity
Composite materials
Processing
2005

Microwave processing of chopped natural fiber composites and their thermal and morphological characterizations

Sgriccia, N., Hawley, M. C. & Misra, M. 2005 Annual Technical Conference - ANTEC, Conference Proceedings. Vol. 4, p. 143-147 5 p.

Research output: ResearchConference contribution

Natural fibers
Curing
Microwaves
Composite materials
Processing

Microwave processing of natural fiber composites and their characterization

Sgriccia, N., Hawley, M. C. & Misra, M. 2005 Global Plastics Environmental Conference 2005: GPEC 2005 - Creating Sustainability for the Environment. p. 711 1 p.

Research output: ResearchConference contribution

Natural fibers
Curing
Microwaves
Composite materials
Processing
2004

Coupled electromagnetic thermal and kinetic modeling for microwave processing of polymers

Sun, R., Zhou, S., Zong, L., Mandal, D., Kempel, L., Hawley, M. & Benard, A. 2004 AIChE Annual Meeting, Conference Proceedings. p. 1717 1 p.

Research output: ResearchConference contribution

Curing
Microwaves
Kinetics
Polymers
Processing

Dielectric properties of crosslinking epoxy resins at 2.45 GHZ

Zong, L., Zhou, S., Sun, R., Kempel, L. C. & Hawley, M. C. 2004 AIChE Annual Meeting, Conference Proceedings. p. 1455 1 p.

Research output: ResearchConference contribution

Epoxy resins
Crosslinking
Dielectric properties
Temperature
Ethers
2 Citations

Dielectric properties of polymer materials at a high microwave frequency

Zong, L., Kempel, L. C. & Hawley, M. C. 2004 IEEE Antennas and Propagation Society, AP-S International Symposium (Digest). Vol. 1, p. 333-336 4 p.

Research output: ResearchConference contribution

Microwave frequencies
Dielectric properties
Polymers
Free volume
Epoxy resins
1 Citations

Epoxy/organoclay nanocomposites synthesized with thermal and microwave methods

Zhou, S., Wood, A., Boyapati, K., Hawley, M. C., Lee, A. & Kempel, L. C. 2004 Global Plastics Environmental Conference 2004 - Plastics: Helping Grow a Greener Environment, GPEC 2004. p. 89-99 11 p.

Research output: ResearchConference contribution

Organoclay
Nanocomposites
Microwaves
Hot Temperature
Clay

Synthesis of long and well-aligned carbon nanotubes

Zhou, S., Zuo, S., Grummon, D., Liang, X., Asmussen, J., Hawley, M. C. & Zhang, Y. 2004 International SAMPE Technical Conference. p. 2481-2488 8 p.

Research output: ResearchConference contribution

Carbon Nanotubes
Nanotubes
Carbon nanotubes
Electron microscopes
Methane

Synthesis of long and well-aligned carbon nanotubes

Zhou, S., Zuo, S., Grummon, D., Liang, X., Asmussen, J., Hawley, M. C. & Zhang, Y. 2004 International SAMPE Symposium and Exhibition (Proceedings). Vol. 49, p. 2463-2470 8 p.

Research output: ResearchConference contribution

Carbon Nanotubes
Nanotubes
Carbon nanotubes
Electron microscopes
Methane
2003
1 Citations

Measurement techniques for ferromagnetic materials using a stripline

Bogle, A., Kempel, L., Rothwell, E., Nyquist, D., Hawley, M., Schneider, S. & Havrilla, M. 2003 IEEE Antennas and Propagation Society, AP-S International Symposium (Digest). Vol. 4, p. 456-459 4 p.

Research output: ResearchConference contribution

Ferromagnetic materials
Polymers
Composite materials
Testing
Dissimilar materials
2001
5 Citations

A study of effect of conducting additives on microwave heating and curing rates of epoxy

Zhou, S. & Hawley, M. C. 2001 International SAMPE Symposium and Exhibition (Proceedings). Repecka, L. & Saremi, F. F. (eds.). Vol. 46 II, p. 2243-2251 9 p.

Research output: ResearchConference contribution

Microwave heating
Curing
Soot
Dielectric properties
Resins
1998
1 Citations

Microwave pultrusion of graphite/epoxy composites using single frequency and variable frequency processing techniques

Smith, A. C., McMillan, A. M. & Hawley, M. C. 1998 International SAMPE Technical Conference. Wilson, B. A., Hunter, B. J., May, R. & Clements, L. L. (eds.). SAMPE, Vol. 30, p. 213-225 13 p.

Research output: ResearchConference contribution

Pultrusion
Graphite epoxy composites
Microwaves
Processing
Applicators
1997

Avoiding `Build-to-Print' in polymer composites: Design and manufacturing decision support at the conceptual stages

McDowell, J. K., Sticklen, J. & Hawley, M. C. 1997 IEE Colloquium (Digest). Anon (ed.). 16 ed. IEE

Research output: ResearchConference contribution

Composite materials
Polymers
Blueprints
Conceptual design
Computer aided design
4 Citations

Characterization of asphalt binders mixed with epoxy terminated ethylene terpolymer

Lee, Y. J., France, L. M. & Hawley, M. C. 1997 Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering. Anon (ed.). ACS, Vol. 76, p. 397-398 2 p.

Research output: ResearchConference contribution

asphalt
Terpolymers
Binders
ethylene
Asphalt
1996

Conceptual design support for converting metal assemblies into polymer composites

McDowell, J. K., Lin, Y., Zhou, K., Lenz, T. J., Sticklen, J., Hawley, M. C., Wigell, G. A. & Scanlon, J. F. 1996 American Society of Mechanical Engineers, Materials Division (Publication) MD. Nicholas, T. (ed.). ASME, Vol. 74, p. 61-62 2 p.

Research output: ResearchConference contribution

Conceptual design
Composite materials
Polymers
Metals
Decision support systems
1994
7 Citations

Expansion of an intelligent decision support system for process selection and process design in polymer composites

Moy, B., McDowell, J. K., Lenz, T., Sticklen, J. & Hawley, M. C. 1994 International SAMPE Technical Conference. SAMPE, Vol. 26, p. 162-171 10 p.

Research output: ResearchConference contribution

Decision support systems
Process design
Polymers
Composite materials
Knowledge based systems

Information architecture for composites design and the role of knowledge-based systems and product data exchange standards

McDowell, J. K., Hawley, M. C., Kamel, A. & Sticklen, J. Oct 1994 ASTM Special Technical Publication. 1214 ed. ASTM, p. 129-137 9 p.

Research output: ResearchConference contribution

Knowledge based systems
Electronic data interchange
Composite materials
Engineers
Polymers
1 Citations

Integrating material/part/process design for polymer composites. A knowledge-based problem solving approach

McDowell, J. K., Kamel, A., Sticklen, J. & Hawley, M. C. 1994 Proceedings of the American Society for Composites. Technomic Publ Co Inc, p. 54-63 10 p.

Research output: ResearchConference contribution

Process design
Polymers
Composite materials
Fibers
Hot Temperature

Problem solving architecture based on the large-grain Generic Task Approach

McDowell, J. K., Sticklen, J. & Hawley, M. C. 1994 Proceedings of the Symposium on Knowledge-Based Applications in Materials Science and Engineering. McDowell, J. K. (ed.). Publ by Minerals, Metals & Materials Soc (TMS), p. 99-111 13 p.

Research output: ResearchConference contribution

Composite materials
Polymers
Knowledge based systems
Process design
Decision support systems

Processing of complex shapes with single-mode resonant frequency microwave applicators

Fellows, L. A., Delgado, R. & Hawley, M. C. 1994 International SAMPE Technical Conference. SAMPE, Vol. 26, p. 393-405 13 p.

Research output: ResearchConference contribution

Applicators
Natural frequencies
Microwaves
Processing
Geometry
1993
3 Citations

Domain structure and inference strategies in knowledge-based design of polymer composites

Mcdowell, J., Kamel, A., Hawley, M. & Sticklen, J. 1993 SAE Technical Papers.

Research output: ResearchConference contribution

Composite materials
Polymers
Knowledge based systems
Systems analysis
Fibers
4 Citations

Kinetic modelling of vinyl ester resin polymerization

Dhulpila, R., Krieg, G. & Hawley, M. C. 1993 Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering. Publ by ACS, Vol. 68, p. 175-176 2 p.

Research output: ResearchConference contribution

Rate constants
Esters
Resins
Polymerization
Kinetics
2 Citations

Preliminary tests of the application of continuous microwave technique to pultrusion

Lin, M. & Hawley, M. C. 1993 International SAMPE Symposium and Exhibition (Proceedings). Bailey, V., Janicki, G. C. & Haulik, T. (eds.). 1 ed. SAMPE, Vol. 38, p. 436-445 10 p.

Research output: ResearchConference contribution

Pultrusion
Microwaves
Heating
Curing
Processing
1992

Experimental design and preliminary results of microwave heating of complex shapes by mode-switching techniques

Fellows, L. A. & Hawley, M. C. 1992 International SAMPE Symposium and Exhibition. Publ by SAMPE, Vol. 37, p. 914-928 15 p.

Research output: ResearchConference contribution

Microwave heating
Design of experiments
Microwaves
Applicators
Polymers
12 Citations

Modeling of microwave and thermal cure for epoxy resin

Wei, J., Hawley, M. C. & DeMeuse, M. T. 1992 Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering. Publ by ACS, Vol. 66, p. 478-479 2 p.

Research output: ResearchConference contribution

Epoxy Resins
Microwaves
Hot Temperature
Epoxy resins
Vitrification
3 Citations

Scale-up study of microwave heating of epoxy in tunable cavities

Wei, J., Thomas, B. & Hawley, M. C. 1992 International SAMPE Symposium and Exhibition. Publ by SAMPE, Vol. 37, p. 929-943 15 p.

Research output: ResearchConference contribution

Microwave heating
Heating
Sulfones
Microwaves
Geometry
1 Citations

Theoretical nozzle performance of a microwave electrothermal thruster using experimental data

Haraburda, S. S. & Hawley, M. C. 1992 AIAA/ASME/SAE/ASEE 28th Joint Propulsion Conference and Exhibit, 1992. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA-92-3110

Research output: ResearchConference contribution

Propellants
Nozzles
Microwaves
Plasmas
Rockets
1990

Diagnostic evaluations of microwave generated helium and nitrogen plasma mixtures

Haraburda, S. S., Hawley, M. C. & Dinkel, D. W. 1990 AlAA/DGLR/JSASS 21st International Electric Propulsion Conference, 1990. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA 90-2634

Research output: ResearchConference contribution

Nitrogen plasma
Propellants
Helium
Microwaves
Plasmas
1989
9 Citations

Comparison of some mechanical properties of an electromagnetically and thermally processed epoxy resin system

Singer, S. M., Jow, J., DeLong, J. D. & Hawley, M. C. 1989 Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering. Publ by ACS, Vol. 60, p. 869-874 6 p.

Research output: ResearchConference contribution

Epoxy Resins
Mechanical properties
Hot Temperature
Epoxy resins
Electromagnetic waves
1988

Concept of microwave plasma propulsion and measurements of plasma energy transport properties

Hoekstra, C., Filpus, J., Gronlund, N., Chapman, R. & Hawley, M. 1988 American Institute of Chemical Engineers, National Meeting. Publ by AIChE

Research output: ResearchConference contribution

Transport properties
Propulsion
Microwaves
Plasmas
Temperature
1987
1 Citations

A computer model for the recombination zone of a microwave-plasma electrothermal rocket

Filpus, J. W. & Hawley, M. C. 1987 19th International Electric Propulsion Conference, 1987. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA-87-1014

Research output: ResearchConference contribution

Rockets
Microwaves
Derivatives
Plasmas
Boundary conditions
1 Citations

A review of research and development on the microwave-plasma electrothermal rocket

Hawley, M. C., Asmussen, J., Filpus, J. W., Frasch, L. L., Whitehair, S., Morin, T. J. & Chapman, R. 1987 19th International Electric Propulsion Conference, 1987. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA-87-1011

Research output: ResearchConference contribution

Rockets
Microwaves
Plasmas
Fluids
Radiation
7 Citations

DIELECTRIC AND TEMPERATURE MEASUREMENTS DURING MICROWAVE CURING OF EPOXY IN A SWEEPING RESONANT CAVITY.

Jow, J., Finzel, M., Asmussen, J. & Hawley, M. C. 1987 IEEE MTT-S International Microwave Symposium Digest. IEEE, p. 465-468 4 p.

Research output: ResearchConference contribution

cavity resonators
curing
temperature measurement
microwaves
temperature

REACTION MODEL FOR THE SOLVOLYSIS OF LIGNOCELLULOSE BY ANHYDROUS HYDROGEN FLUORIDE VAPOR.

Rorrer, G. L., Mohring, W. R., Hawley, M. C. & Lamport, D. T. A. 1987 American Institute of Chemical Engineers, National Meeting.

Research output: ResearchConference contribution

Vapors
Hydrogen
Cellulose
Adsorption
Adsorption isotherms
1985
2 Citations

Measurements of energy distribution and wall temperature in flowing hydrogen microwave plasma systems

Chapman, R., Pinzel, M. & Hawley, M. C. 1985 AlAA/DGLR/JSASS International Electric Propulsion Conference, 1985. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA-85-2052

Research output: ResearchConference contribution

Microwaves
Plasmas
Hydrogen
Temperature
Energy transfer
1 Citations

MEASUREMENTS OF ENERGY DISTRIBUTION AND WALL TEMPERATURE IN FLOWING HYDROGEN MICROWAVE PLASMA SYSTEMS.

Chapman, R., Finzel, M. & Hawley, M. C. 1985 AIAA Paper. AIAA

Research output: ResearchConference contribution

Microwaves
Plasmas
Hydrogen
Temperature
Energy transfer

ORTHOGONAL COLLOCATION OF THE NONLINEAR BOLTZMANN EQUATION.

Morin, T. J. & Hawley, M. C. 1985 American Society of Mechanical Engineers (Paper). ASME

Research output: ResearchConference contribution

Boltzmann equation
Distribution functions
Momentum
Trajectories
Molecules
1984
2 Citations
Electron gas
Energy transfer
Microwaves
Plasmas
Density of gases
1 Citations

ENERGETICS OF HYDROGEN ATOM RECOMBINATION: ANALYSIS, EXPERIMENTS, AND MODELING.

Filpus, J. W. & Hawley, M. C. 1984 Unknown Host Publication Title. p. 551-559 9 p.

Research output: ResearchConference contribution

Microwaves
Atoms
Hydrogen
Experiments
Propulsion
2 Citations

MEASUREMENTS OF ENERGY DISTRIBUTION IN MICROWAVE PLASMAS OF N//2 AND He AND COMPARISONS WITH RESULTS FOR H//2.

Chapman, R. & Hawley, M. C. 1984 Unknown Host Publication Title. p. 547-550 4 p.

Research output: ResearchConference contribution

Microwaves
Plasmas
Gases
Energy transfer
Electromagnetic waves
2 Citations

TIME DEPENDENT SOLUTION OF THE FULLY COUPLED BOLTZMANN AND MACROSCOPIC BALANCE EQUATIONS FOR A TWO COMPONENT SELF-SUSTAINED MICROWAVE PLASMA.

Morin, T. J. & Hawley, M. C. 1984 Unknown Host Publication Title. p. 541-546 6 p.

Research output: ResearchConference contribution

Electron gas
Energy transfer
Microwaves
Plasmas
Propulsion
1983

INTEGRATED APPROACH FOR UTILIZATION OF BIORESOURCES FOR FUELS, CHEMICALS, AND TRADITIONAL USES.

Bartholic, J. F., Hanover, J., Tombaugh, L., Downey, K. W., Hawley, M. C. & Koenig, H. 1983 Unknown Host Publication Title. Soltes, E. J. (ed.). Academic Press, p. 529-565 37 p.

Research output: ResearchConference contribution

Biomass
Productivity
Industrial chemicals
Genetic engineering
Synthesis gas
10 Citations

REACTION RATES FOR LIQUID PHASE HF SACCHARIFICATION OF WOOD.

Selke, S. M., Hawley, M. C. & Lamport, D. T. A. 1983 Unknown Host Publication Title. Soltes, E. J. (ed.). Academic Press, p. 329-349 21 p.

Research output: ResearchConference contribution

Saccharification
Reaction rates
Wood
Liquids
Sugars
1982

INTEGRATED APPROACH FOR UTILIZATION OF BIORESOURCES FOR FUELS, CHEMICALS, AND TRADITIONAL USES.

Bartholic, J., Koenig, H., Hanover, J., Hawley, M. & Tombaugh, L. Sep 1982 American Chemical Society, Division of Petroleum Chemistry, Preprints. 4 ed. ACS, Vol. 27, p. 1018 1 p.

Research output: ResearchConference contribution

2 Citations

MEASUREMENTS OF ENERGY DISTRIBUTION AND THRUST FOR MICROWAVE PLASMA COUPLING OF ELECTRICAL ENERGY TO HYDROGEN FOR PROPULSION.

Morin, T., Chapman, R., Filpus, J., Hawley, M., Kerber, R., Asmussen, J. & Nakanishi, S. 1982 AIAA Paper. AIAA

Research output: ResearchConference contribution

REACTION RATES FOR LIQUID PHASE HF SACCHARIFICATION OF WOOD.

Selke, S., Hawley, M. C. & Lamport, D. T. A. Sep 1982 American Chemical Society, Division of Petroleum Chemistry, Preprints. 4 ed. ACS, Vol. 27, p. 1022 1 p.

Research output: ResearchConference contribution