If you made any changes in Pure these will be visible here soon.

Publications 2002 2018

  • 26 h-Index
  • 73 Article
  • 3 Chapter
  • 3 Conference contribution
  • 2 Book
2018

Comparison of dislocation content measured with transmission electron microscopy and micro-Laue diffraction based streak analysis

Zhang, C., Balachandran, S., Eisenlohr, P., Crimp, M. A., Boehlert, C., Xu, R. & Bieler, T. R. Feb 1 2018 In : Scripta Materialia. 144, p. 74-77 4 p.

Research output: Contribution to journalArticle

Diffraction
Transmission electron microscopy
transmission electron microscopy
diffraction
Burgers vector

Contraction Twinning Dominated Tensile Deformation and Subsequent Fracture in Extruded Mg-1Mn (Wt Pct) at Ambient Temperature

Chakkedath, A., Maiti, T., Bohlen, J., Yi, S., Letzig, D., Eisenlohr, P. & Boehlert, C. J. Mar 22 2018 (Accepted/In press) In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 1-14 14 p.

Research output: Contribution to journalArticle

tensile deformation
Xerogels
Twinning
twinning
ambient temperature
Grain boundaries
titanium
Titanium
shear
Dislocations (crystals)

Exploring the accuracy limits of lattice strain quantification with synthetic diffraction data

Zhang, C., Bieler, T. R. & Eisenlohr, P. Sep 1 2018 In : Scripta Materialia. 154, p. 127-130 4 p.

Research output: Contribution to journalArticle

Diffraction
Scattering
regression analysis
Synchrotrons
diffraction

Fourier-based spectral method solution to finite strain crystal plasticity with free surfaces

Maiti, T. & Eisenlohr, P. Mar 1 2018 In : Scripta Materialia. 145, p. 37-40 4 p.

Research output: Contribution to journalArticle

spectral methods
plastic properties
Plasticity
Crystals
crystals
2017
2 Citations

Dynamic restoration of severely predeformed, ultrafine-grained pure Cu at 373 K observed in situ

Král, P., Blum, W., Dvořák, J., Eisenlohr, P., Petrenec, M. & Sklenička, V. Dec 1 2017 In : Materials Characterization. 134, p. 329-334 6 p.

Research output: Contribution to journalArticle

Coarsening
Plastic flow
restoration
Restoration
Equal channel angular pressing
1 Citations
Indentation
Single Crystal
indentation
estimating
Single crystals
1 Citations

Identification of whisker grain in Sn coatings by analyzing crystallographic micro-texture using electron back-scatter diffraction

Jagtap, P., Chakraborty, A., Eisenlohr, P. & Kumar, P. Aug 1 2017 In : Acta Materialia. 134, p. 346-359 14 p.

Research output: Contribution to journalArticle

Textures
Diffraction
Coatings
Electrons
Brass

In situ study of thermally activated flow and dynamic restoration of ultrafine-grained pure Cu at 373 K

Blum, W., Král, P., Dvořák, J., Petrenec, M., Eisenlohr, P. & Sklenička, V. Sep 18 2017 (Accepted/In press) In : Journal of Materials Research. p. 1-8 8 p.

Research output: Contribution to journalArticle

restoration
Restoration
Chemical activation
activation
Equal channel angular pressing
1 Citations

Subsurface Grain Morphology Reconstruction by Differential Aperture X-ray Microscopy

Eisenlohr, P., Shanthraj, P., Vande Kieft, B. R., Bieler, T. R., Liu, W. & Xu, R. Jun 1 2017 In : JOM. 69, 6, p. 1100-1105 6 p.

Research output: Contribution to journalArticle

Microscopic examination
X rays
Surface reconstruction
Crystal microstructure
Crystal orientation
2016
5 Citations

Crystal plasticity study of monocrystalline stochastic honeycombs under in-plane compression

Ma, D., Eisenlohr, P., Epler, E., Volkert, C. A., Shanthraj, P., Diehl, M., Roters, F. & Raabe, D. Jan 15 2016 In : Acta Materialia. 103, p. 796-808 13 p.

Research output: Contribution to journalArticle

Plasticity
Plastic deformation
Crystals
Single crystals
Polycrystals
6 Citations

Effects of Grain Refinement by ECAP on the Deformation Resistance of Al Interpreted in Terms of Boundary-Mediated Processes

Blum, W., Dvořák, J., Král, P., Eisenlohr, P. & Sklenička, V. Dec 1 2016 In : Journal of Materials Science and Technology. 32, 12, p. 1309-1320 12 p.

Research output: Contribution to journalArticle

Grain refinement
Creep
Equal channel angular pressing
Thermomechanical treatment
Crystal defects
2 Citations

From insect scales to sensor design: Modelling the mechanochromic properties of bicontinuous cubic structures

Wu, X., Ma, D., Eisenlohr, P., Raabe, D. & Fabritius, H. O. Jun 13 2016 In : Bioinspiration and Biomimetics. 11, 4, 045001

Research output: Contribution to journalArticle

Hemiptera
Sensors
Photonic crystals
Optics and Photonics
Weevils
1 Citations

Interpretation of unloading tests on nanocrystalline Cu in terms of two mechanisms of deformation

Blum, W., Eisenlohr, P. & Hu, J. May 17 2016 In : Materials Science and Engineering A. 665, p. 171-174 4 p.

Research output: Contribution to journalArticle

unloading
Unloading
strain rate
Strain rate
recovery
8 Citations
Polycrystals
polycrystals
Numerical methods
microstructure
Microstructure
8 Citations
Nanoindentation
Titanium
Indentation
Plasticity
Grain boundaries
2015
2 Citations

Analytical bounds of in-plane Young's modulus and full-field simulations of two-dimensional monocrystalline stochastic honeycomb structures

Ma, D., Eisenlohr, P., Shanthraj, P., Diehl, M., Roters, F. & Raabe, D. Aug 4 2015 In : Computational Materials Science. 109, p. 323-329 7 p., 6642

Research output: Contribution to journalArticle

Honeycomb structures
honeycomb structures
struts
Honeycomb
Struts
4 Citations

Correct Interpretation of Creep Rates: A Case Study of Cu

Blum, W., Dvořák, J., Král, P., Eisenlohr, P. & Sklenička, V. Nov 1 2015 In : Journal of Materials Science and Technology. 31, 11, p. 1065-1068 4 p.

Research output: Contribution to journalArticle

Creep
Activation energy
Systematic errors
Loads (forces)
2 Citations

Deformation Strength of Nanocrystalline Thin Films

Blum, W. & Eisenlohr, P. Dec 28 2015 (Accepted/In press) In : Journal of Materials Science and Technology.

Research output: Contribution to journalArticle

Film thickness
Recovery
Thin films
Microstructure
24 Citations
Plasticity
Finite element method
Crystals
Microstructure
Structural metals
10 Citations

In situ study of microstructure and strength of severely predeformed pure Cu in deformation at 573 K

Blum, W., Dvořák, J., Král, P., Petrenec, M., Eisenlohr, P. & Sklenička, V. Nov 22 2015 In : Philosophical Magazine. 95, 33, p. 3696-3711 16 p.

Research output: Contribution to journalArticle

microstructure
elongation
scanning electron microscopy
pressing
hardening

Multiscale deep drawing analysis of dual-phase steels using grain cluster-based RGC scheme

Tjahjanto, D. D., Eisenlohr, P. & Roters, F. Jun 1 2015 In : Modelling and Simulation in Materials Science and Engineering. 23, 4, 045005

Research output: Contribution to journalArticle

deep drawing
Deep drawing
Steel
steels
homogenizing
35 Citations

Numerically robust spectral methods for crystal plasticity simulations of heterogeneous materials

Shanthraj, P., Eisenlohr, P., Diehl, M. & Roters, F. 2015 In : International Journal of Plasticity. 66, p. 31-45 15 p.

Research output: Contribution to journalArticle

Plasticity
Crystals
Polycrystalline materials
8 Citations

Synergy of atom-probe structural data and quantum-mechanical calculations in a theory-guided design of extreme-stiffness superlattices containing metastable phases

Friák, M., Tytko, D., Holec, D., Choi, P. P., Eisenlohr, P., Raabe, D. & Neugebauer, J. Sep 2 2015 In : New Journal of Physics. 17, 9, 093004

Research output: Contribution to journalArticle

superlattices
stiffness
elastic properties
probes
atoms
4 Citations

Thermally activated flow in soft and hard regions: Getting information on work hardening strain and recovery strain from rate change tests

Blum, W., Eisenlohr, P., Prell, M. & Durst, K. 2015 In : Kovove Materialy. 53, 4, p. 199-205 7 p.

Research output: Contribution to journalArticle

Strain hardening
Recovery
Defects
Polycrystals
Residual stresses
2014
35 Citations
Nickel
Dislocations (crystals)
Plasticity
Crystalline materials
Crystals
17 Citations

Effect of grain refinement by ECAP on creep of pure Cu

Blum, W., Dvořák, J., Král, P., Eisenlohr, P. & Sklenička, V. Jan 10 2014 In : Materials Science and Engineering A. 590, p. 423-432 10 p.

Research output: Contribution to journalArticle

Grain refinement
Creep
thermomechanical treatment
creep strength
work hardening
52 Citations

Grain boundaries and interfaces in slip transfer

Bieler, T. R., Eisenlohr, P., Zhang, C., Phukan, H. J. & Crimp, M. A. 2014 In : Current Opinion in Solid State and Materials Science. 18, 4, p. 212-226 15 p.

Research output: Contribution to journalArticle

Grain boundaries
Nucleation
Tantalum
Polycrystals
Microstructure
6 Citations

Grain boundary responses to heterogeneous deformation in tantalum polycrystals

Bieler, T. R., Sutton, S. C., Dunlap, B. E., Keith, Z. A., Eisenlohr, P., Crimp, M. A. & Boyce, B. L. Jan 2014 In : JOM. 66, 1, p. 121-128 8 p.

Research output: Contribution to journalArticle

Tantalum
Polycrystals
Grain boundaries
Dislocations (crystals)
Electrons

Slip system analysis in the cold rolling of a Ni3Al single crystal

Demura, M., Raabe, D., Roters, F., Eisenlohr, P., Xu, Y., Hirano, T. & Kishida, K. 2014 Materials Science Forum. Trans Tech Publications Ltd, Vol. 783-786, p. 1111-1116 6 p. (Materials Science Forum; vol. 783-786)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

cold rolling
Cold rolling
systems analysis
slip
Systems analysis
7 Citations

What is "stationary" deformation of pure Cu?

Blum, W., Dvořák, J., Král, P., Eisenlohr, P. & Sklenička, V. Apr 2014 In : Journal of Materials Science. 49, 8, p. 2987-2997 11 p.

Research output: Contribution to journalArticle

Creep
Equal channel angular pressing
Crystal microstructure
Strain hardening
2013
105 Citations

A spectral method solution to crystal elasto-viscoplasticity at finite strains

Eisenlohr, P., Diehl, M., Lebensohn, R. A. & Roters, F. Jul 2013 In : International Journal of Plasticity. 46, p. 37-53 17 p.

Research output: Contribution to journalArticle

Viscoplasticity
Crystals
Finite element method
Polycrystalline materials
Micromechanics

Crystal plasticity modeling

Roters, F., Diehl, M., Eisenlohr, P. & Raabe, D. 2013 Microstructural Design of Advanced Engineering Materials. Molodov, D. A. (ed.). Wiley-VCH Verlag, p. 41-67 27 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

2 Citations

Crystal Plasticity Modeling

Roters, F., Diehl, M., Eisenlohr, P. & Raabe, D. Jul 31 2013 Microstructural Design of Advanced Engineering Materials. wiley, p. 41-67 27 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Plasticity
Crystals
173 Citations

Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, experiments

Steinmetz, D. R., Jäpel, T., Wietbrock, B., Eisenlohr, P., Gutierrez-Urrutia, I., Saeed-Akbari, A., Hickel, T., Roters, F. & Raabe, D. Jan 2013 In : Acta Materialia. 61, 2, p. 494-510 17 p.

Research output: Contribution to journalArticle

Steel
Twinning
Strain hardening
Plasticity
Physics
43 Citations

Simulation of shear banding in heterophase co-deformation: Example of plane strain compressed Cu-Ag and Cu-Nb metal matrix composites

Jia, N., Roters, F., Eisenlohr, P., Raabe, D. & Zhao, X. Jul 2013 In : Acta Materialia. 61, 12, p. 4591-4606 16 p.

Research output: Contribution to journalArticle

Metals
Composite materials
Crystals
Shear bands
Bending (deformation)
26 Citations

Study of {112̄1} Twinning in α-Ti by EBSD and Laue Microdiffraction

Wang, L., Barabash, R., Bieler, T., Liu, W. & Eisenlohr, P. Aug 2013 In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, 8, p. 3664-3674 11 p.

Research output: Contribution to journalArticle

Twinning
twinning
Electron diffraction
electron diffraction
matrices
2012
135 Citations
Polycrystalline materials
Fast Fourier transforms
Polycrystals
Hardening
Numerical methods
62 Citations

DAMASK: The Düsseldorf Advanced MAterial Simulation Kit for studying crystal plasticity using an FE based or a spectral numerical solver

Roters, F., Eisenlohr, P., Kords, C., Tjahjanto, D. D., Diehl, M. & Raabe, D. 2012 Procedia IUTAM. Vol. 3, p. 3-10 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plasticity
Crystals
Constitutive models
Fast Fourier transforms
Boundary value problems

Grain boundary strain transfer and anisotropic polycrystalline deformation in commercial purity titanium

Crimp, M. A., Yang, Y., Wang, L., Eisenlohr, P. & Bieler, T. R. 2012 Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 2, p. 1061-1065 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Titanium
Grain boundaries
Prisms
Chemical activation
Trace analysis
40 Citations

Non-crystallographic shear banding in crystal plasticity FEM simulations: Example of texture evolution in α-brass

Jia, N., Roters, F., Eisenlohr, P., Kords, C. & Raabe, D. Feb 2012 In : Acta Materialia. 60, 3, p. 1099-1115 17 p.

Research output: Contribution to journalArticle

Brass
Plasticity
Textures
Finite element method
Copper
37 Citations

On the importance of a connected hard-phase skeleton for the creep resistance of Mg alloys

Amberger, D., Eisenlohr, P. & Göken, M. Mar 2012 In : Acta Materialia. 60, 5, p. 2277-2289 13 p.

Research output: Contribution to journalArticle

Creep resistance
Creep
Magnetic resonance imaging
Age hardening
Intermetallics
52 Citations

Orientation dependence of shear banding in face-centered-cubic single crystals

Jia, N., Eisenlohr, P., Roters, F., Raabe, D. & Zhao, X. May 2012 In : Acta Materialia. 60, 8, p. 3415-3434 20 p.

Research output: Contribution to journalArticle

Single crystals
Crystals
Shear bands
Textures
Stacking faults
32 Citations

Simulation of dislocation penetration through a general low-angle grain boundary

Liu, B., Eisenlohr, P., Roters, F. & Raabe, D. Aug 2012 In : Acta Materialia. 60, 13-14, p. 5380-5390 11 p.

Research output: Contribution to journalArticle

Dislocations (crystals)
Grain boundaries
Metals
Strength of materials
Plastic deformation
2011
32 Citations

A dislocation density-based crystal plasticity constitutive model for prismatic slip in α-titanium

Alankar, A., Eisenlohr, P. & Raabe, D. Oct 2011 In : Acta Materialia. 59, 18, p. 7003-7009 7 p.

Research output: Contribution to journalArticle

Screw dislocations
Titanium
Constitutive models
Dislocations (crystals)
Plasticity
22 Citations

Characterization and modeling of heterogeneous deformation in commercial purity titanium

Yang, Y., Wang, L., Zambaldi, C., Eisenlohr, P., Barabash, R., Liu, W., Stoudt, M. R., Crimp, M. A. & Bieler, T. R. Sep 2011 In : JOM. 63, 9, p. 66-73 8 p.

Research output: Contribution to journalArticle

Confocal microscopy
Nanoindentation
Titanium
Constitutive models
Plasticity
7 Citations

Control of dynamic recovery and strength by subgrain boundaries - Insights from stress-change tests on CaF2 single crystals

Mekala, S., Eisenlohr, P. & Blum, W. Feb 21 2011 In : Philosophical Magazine. 91, 6, p. 908-931 24 p.

Research output: Contribution to journalArticle

recovery
single crystals
work softening
strain hardening
stress relaxation
43 Citations

Dislocation interactions and low-angle grain boundary strengthening

Liu, B., Raabe, D., Eisenlohr, P., Roters, F., Arsenlis, A. & Hommes, G. Nov 2011 In : Acta Materialia. 59, 19, p. 7125-7134 10 p.

Research output: Contribution to journalArticle

Dislocations (crystals)
Grain boundaries
Computer simulation
Metals
58 Citations
plastic properties
Trace analysis
Plasticity
slip
Crystals
25 Citations
Titanium
plastic properties
Plasticity
Atomic force microscopy
purity