Publications 1981 2018

2002
55 Citations

Modeling thermomechanical fatigue behavior of Sn-Ag solder joints

Lee, J. G., Telang, A., Subramanian, K. N. & Bieler, T. R. Nov 2002 In : Journal of Electronic Materials. 31, 11, p. 1152-1159 8 p.

Research output: Contribution to journalArticle

solders
Soldering alloys
Fatigue of materials
plastic anisotropy
damage
74 Citations

Orientation imaging studies of Sn-based electronic solder joints

Telang, A. U., Bieler, T. R., Choi, S. & Subramanian, K. N. Sep 2002 In : Journal of Materials Research. 17, 9, p. 2294-2306 13 p.

Research output: Contribution to journalArticle

solders
Crystal orientation
Soldering alloys
Imaging techniques
electronics
43 Citations

Residual-mechanical behavior of thermomechanically fatigued Sn-Ag based solder joints

Lee, J. G., Guo, F., Choi, S., Subramanian, K. N., Bieler, T. R. & Lucas, J. P. Sep 2002 In : Journal of Electronic Materials. 31, 9, p. 946-952 7 p.

Research output: Contribution to journalArticle

solders
Soldering alloys
Fatigue of materials
creep strength
cycles
3 Citations

Tensile microcrack initiation at γ-γ boundaries in TiAl

Simkin, B. A., Bieler, T. R. & Crimp, M. A. 2002 Proceedings of the TMS Fall Meeting. Soboyejo, W. O., Lewandowski, J. J. & Ritchie, R. O. (eds.). p. 309-314 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microcracks
Grain boundaries
Twinning
Microcracking
Crystal orientation
6 Citations

The effect of crystal orientation on crack nucleation and arrest in a near-gamma TiAl alloy

Ng, B. C., Bieler, T. R. & Crimp, M. A. 2002 Proceedings of the TMS Fall Meeting. Soboyejo, W. O., Lewandowski, J. J. & Ritchie, R. O. (eds.). p. 303-308 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crystal orientation
Microcracks
Grain boundaries
Nucleation
Cracks
140 Citations

The origins of heterogeneous deformation during primary hot working of Ti-6Al-4V

Bieler, T. R. & Semiatin, S. L. 2002 In : International Journal of Plasticity. 18, 9, p. 1165-1189 25 p.

Research output: Contribution to journalArticle

Shear bands
Hot working
Microstructure
Prisms
Crystal orientation
14 Citations

Using OIM to investigate the microstructural evolution of Ti-6Ai-4V

Bieler, T. R., Glavicic, M. G. & Semiatin, S. L. Jan 2002 In : JOM. 54, 1, p. 31-36 6 p.

Research output: Contribution to journalArticle

Microstructural evolution
microstructure
Microstructure
Textures
texture
2001
2 Citations

Analysis of primary hot working of Ti-6Al-4V with orientation imaging

Bieler, T. R. & Semiatin, S. L. 2001 Microstructure Modeling and Prediction During Thermomechanical Processing. Srinivasan, R., Semiatin, S. L., Beaudoin, A., Fox, S., Jin, Z., Srinivasan, R., Semiatin, S. L., Beaudoin, A., Fox, S. & Jin, Z. (eds.). p. 27-36 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hot working
Imaging techniques
Microstructure
Constitutive models
Nucleation
44 Citations

Creep properties of eutectic Sn-3.5Ag solder joints reinforced with mechanically incorporated Ni particles

Guo, F., Lee, J., Lucas, J. P., Subramanian, K. N. & Bieler, T. R. Sep 2001 In : Journal of Electronic Materials. 30, 9, p. 1222-1227 6 p.

Research output: Contribution to journalArticle

creep properties
solders
eutectics
Soldering alloys
Eutectics
56 Citations

Creep properties of Sn-Ag solder joints containing intermetallic particles

Choi, S., Lee, J. G., Guo, F., Bieler, T. R., Subramanian, K. N. & Lucas, J. P. Jun 2001 In : JOM. 53, 6, p. 22-26 5 p.

Research output: Contribution to journalArticle

Soldering alloys
creep
Intermetallics
Creep
Tin
82 Citations
hot working
Hot working
plastic flow
Plastic flow
softening
27 Citations
hot working
Hot working
softening
textures
Textures
19 Citations

Effects of Pb contamination on the eutectic Sn-Ag solder joint

Choi, S., Bieler, T. R., Subramanian, K. N. & Lucas, J. P. 2001 In : Soldering and Surface Mount Technology. 13, 2, p. 26-29 4 p.

Research output: Contribution to journalArticle

solders
eutectics
Soldering alloys
Eutectics
contamination

Feedback loops along the pre-requisite tree

Bieler, T. R., Huebner, M., Soutas-Little, R. W. & Crimp, M. J. 2001 Materials Research Society Symposium Proceedings. Vol. 632, p. 1-12 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Feedback
Students
Engineering education
Curricula
Engineers
2 Citations

Measurements and modeling of deformation transfer at γ-γ grain boundaries in TiAl

Mason, D. E., Simkin, B. A., Crimp, M. A. & Bieler, T. R. 2001 Proceedings of the TMS Fall Meeting. Lesuer, D. R. & Srivatsan, T. R. (eds.). p. 149-160 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Grain boundaries
Imaging techniques
Trace analysis
Electrons
Microcracks
94 Citations

Processing and aging characteristics of eutectic Sn-3.5Ag solder reinforced with mechanically incorporated Ni particles

Guo, F., Lee, J., Choi, S., Lucas, J. P., Bieler, T. R. & Subramanian, K. N. Sep 2001 In : Journal of Electronic Materials. 30, 9, p. 1073-1082 10 p.

Research output: Contribution to journalArticle

solders
eutectics
Soldering alloys
Eutectics
Aging of materials
12 Citations

Strain-path effects during hot working of Ti-6Al-4V with a colony-alpha microstructure

Semiatin, S. L., Brown, J. O., Brown, T. M., DeLo, D. P., Bieler, T. R. & Beynon, J. H. Jul 2001 In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 32, 6, p. 1556-1559 4 p.

Research output: Contribution to journalArticle

hot working
Hot working
microstructure
Microstructure
flow stability
46 Citations

Stress relaxation behavior of composite and eutectic Sn-Ag solder joints

Jadhav, S. G., Bieler, T. R., Subramanian, K. N. & Lucas, J. P. Sep 2001 In : Journal of Electronic Materials. 30, 9, p. 1197-1205 9 p.

Research output: Contribution to journalArticle

stress relaxation
Stress relaxation
solders
eutectics
Soldering alloys
241 Citations

The effect of alpha platelet thickness on plastic flow during hot working of Ti-6Al-4V with a transformed microstructure

Semiatin, S. L. & Bieler, T. R. Oct 9 2001 In : Acta Materialia. 49, 17, p. 3565-3573 9 p.

Research output: Contribution to journalArticle

Hot working
Platelets
Plastic flow
Strain rate
Microstructure
10 Citations

The effect of crystal orientation on deformation transfer at γ-γ boundaries in a near-γ TiAl based alloy

Simkin, B. A., Crimp, M. A., Bieler, T. R. & Mason, D. E. 2001 Proceedings of the International Symposium on Structural Intermetallics. Hemker, K. J., Dimiduk, D. M., Clemens, H. & Darolia, R. (eds.). p. 391-400 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crystal orientation
Twinning
Dislocations (crystals)
Grain boundaries
Chemical activation
9 Citations

Transitions in morphology observed in nitrogen/methane-hydrogen depositions of polycrystalline diamond films

Ayres, V. M., Farhan, M., Spach, D., Bobbitt, J., Majeed, J. A., Wright, B. F., Wright, B. L., Asmussen, J., Kanatzidis, M. G. & Bieler, T. R. Jun 2001 In : Journal of Applied Physics. 89, 11 I, p. 6062-6068 7 p.

Research output: Contribution to journalArticle

diamond films
methane
nitrogen
hydrogen
textures
2000
13 Citations

Effect of nitrogen on competitive growth mechanisms of diamond thin films

Ayres, V. M., Bieler, T. R., Kanatzidis, M. G., Spano, J., Hagopian, S., Balhareth, H., Wright, B. F., Farhan, M., Abdul Majeed, J., Spach, D., Wright, B. L. & Asmussen, J. Apr 2000 In : Diamond and Related Materials. 9, 3, p. 236-240 5 p.

Research output: Contribution to journalArticle

Diamond films
Nitrogen
textures
Textures
diamonds
63 Citations

Formation and growth of interfacial intermetallic layers in eutectic Sn-Ag solder and its composite solder joints

Choi, S., Lucas, J. P., Subramanian, K. N. & Bieler, T. R. Aug 2000 In : Journal of Materials Science: Materials in Electronics. 11, 6, p. 497-502 6 p.

Research output: Contribution to journalArticle

solders
eutectics
Soldering alloys
Eutectics
Intermetallics
46 Citations

Quantification of creep strain distribution in small crept lead-free in-situ composite and non composite solder joints

McDougall, J., Choi, S., Bieler, T. R., Subramanian, K. N. & Lucas, J. P. Jun 15 2000 In : Materials Science and Engineering A. 285, 1-2, p. 25-34 10 p.

Research output: Contribution to journalArticle

strain distribution
solders
Soldering alloys
Creep
Lead
75 Citations

Thermomechanical fatigue behavior of Sn-Ag solder joints

Choi, S., Subramanian, K. N., Lucas, J. P. & Bieler, T. R. Oct 2000 In : Journal of Electronic Materials. 29, 10, p. 1249-1257 9 p.

Research output: Contribution to journalArticle

solders
Soldering alloys
Fatigue of materials
Aluminum Oxide
cracks
1999
203 Citations
solders
eutectics
Soldering alloys
Eutectics
Intermetallics
20 Citations

Creep deformation behavior in eutectic Sn-Ag solder joints using a novel mapping technique

Lucas, J. P., Guo, F., McDougall, J., Bieler, T. R., Subramanian, K. N. & Park, J. K. Nov 1999 In : Journal of Electronic Materials. 28, 11, p. 1270-1275 6 p.

Research output: Contribution to journalArticle

solders
eutectics
Soldering alloys
Eutectics
Creep
57 Citations

Effect of cooling rate on microstructure and mechanical properties of eutectic Sn-Ag solder joints with and without intentionally incorporated Cu6Sn5 reinforcements

Sigelko, J., Choi, S., Subramanian, K. N., Lucas, J. P. & Bieler, T. R. Nov 1999 In : Journal of Electronic Materials. 28, 11, p. 1184-1188 5 p.

Research output: Contribution to journalArticle

solders
reinforcement
eutectics
Soldering alloys
Eutectics
92 Citations

Flow softening during hot working of Ti-6Al-4V with a lamellar colony microstructure

Miller, R. M., Bieler, T. R. & Semiatin, S. L. May 21 1999 In : Scripta Materialia. 40, 12, p. 1387-1393 7 p.

Research output: Contribution to journalArticle

hot working
Hot working
compression tests
softening
microstructure
49 Citations

Microstructural engineering of solders

Subramanian, K. N., Bieler, T. R. & Lucas, J. P. Nov 1999 In : Journal of Electronic Materials. 28, 11, p. 1176-1183 8 p.

Research output: Contribution to journalArticle

solders
Soldering alloys
engineering
Creep
Stabilization
1998
22 Citations
Gages
Precipitates
Volume fraction
Creep
Creep resistance
14 Citations
Soldering alloys
Eutectics
Intermetallics
Reinforcement
Fatigue of materials
4 Citations

Effect of carbon concentration on primary creep of an investment cast Ti-47Al-2Mn-2Nb+0.8vol%TiB2 alloy

Seo, D. Y., Everard, T., McQuay, P. A. & Bieler, T. R. 1998 Proceedings of the TMS Fall Meeting. Minerals, Metals & Materials Soc (TMS), p. 227-234 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Creep
Carbon
Creep resistance
Microstructure
Carbides
1 Citations

High rate superplastic forging and diffusion bonding

Hopper, M. A. & Bieler, T. R. 1998 TMS Annual Meeting. Minerals, Metals & Materials Soc (TMS), p. 305-312 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diffusion bonding
Forging
strain rate
Strain rate
aluminum
17 Citations

Nanoindentation characterization of microphases in Sn-3.5 Ag eutectic solder joints

Lucas, J. P., Gibson, A. W., Subramanian, K. N. & Bieler, T. R. 1998 Materials Research Society Symposium - Proceedings. Schwartz, D. S., Shih, D. S., Evans, A. G. & Wadley, H. N. G. (eds.). MRS, Vol. 522, p. 339-345 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanoindentation
Soldering alloys
Eutectics
Reinforcement
Mechanical properties
1 Citations

Texture changes due to elevated temperature deformation of mechanically alloyed aluminum tensile specimens

Jin, Z. & Bieler, T. R. 1998 TMS Annual Meeting. Minerals, Metals & Materials Soc (TMS), p. 197-207 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum
Superplastic deformation
Textures
aluminum
texture
1997
6 Citations

Comparison of the creep properties of cast and powder metallurgy-extruded binary NiAl

Raj, S. V., Garg, A. & Bieler, T. R. 1997 Materials Research Society Symposium - Proceedings. Materials Research Society, Vol. 460, p. 473-478 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Powder metallurgy
Creep
Transmission electron microscopy
Microstructure
Temperature
6 Citations

Effect of interstitial concentration and heat treatment on microstructure and primary creep of investment cast Ti-47Al-2Nb-2Mn with 0.8v% TiB2

Seo, D. Y., Bieler, T. R. & Larsen, D. E. 1997 Materials Research Society Symposium - Proceedings. Materials Research Society, Vol. 460, p. 281-286 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Creep
Heat treatment
Microstructure
Creep resistance
Twinning
9 Citations

Effect of stress and temperature on primary creep of Ti-47Al-2Nb-1Mn-0.5W-0.5Mo-0.2Si alloy

Seo, D. Y., Bieler, T. R. & Larsen, D. E. 1997 Proceedings of the International Conference on Creep and Fracture of Engineering Materials and Structures. Earthman, J. C. & Mohamed, F. A. (eds.). Minerals, Metals & Materials Soc (TMS), p. 577-586 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Twinning
Creep
Microstructural evolution
Shear strain
Temperature
1 Citations

Effects of oxygen, water vapor, argon, air and exposure history on fracture strength of Ti-48Al-2Nb-2Cr notched tensile specimens

Bieler, T. R., Dowling, G. T. & Reffeor, W. S. Dec 1997 In : Materials Science and Engineering A. 239-240, 1-2, p. 330-335 6 p.

Research output: Contribution to journalArticle

Argon
Steam
fracture strength
Water vapor
water vapor
47 Citations

Environmental concerns and materials issues in manufactured solder joints

Gibson, A. W., Choi, S., Bieler, T. R. & Subramanian, K. N. 1997 IEEE International Symposium on Electronics & the Environment. Anon (ed.). IEEE, p. 246-251 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Soldering alloys
Microstructural evolution
Strengthening (metal)
Composite materials
Eutectics
1 Citations

Hot deformation in dispersion strengthened aluminum alloys and composites

Bieler, T. R. 1997 In : CIM Bulletin. 90, 1007, p. 55-63 9 p.

Research output: Contribution to journalArticle

Hot working
Superplastic deformation
Aluminum alloys
aluminum
Composite materials
25 Citations

Issues regarding microstructural coarsening due to aging of eutectic tin-silver solder

Gibson, A. W., Choi, S. L., Subramanian, K. N. & Bieler, T. R. 1997 TMS Annual Meeting. Minerals, Metals & Materials Soc (TMS), p. 97-103 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tin
Coarsening
tin
Silver
Soldering alloys
16 Citations

Mechanical properties of Sn-Ag composite solder joints containing copper-based intermetallics

Choi, S. L., Gibson, A. W., McDougall, J. L., Bieler, T. R. & Subramanian, K. N. 1997 TMS Annual Meeting. Minerals, Metals & Materials Soc (TMS), p. 241-245 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Soldering alloys
creep
Intermetallics
Copper
mechanical property
100 Citations

Mechanism of high strain rate superplasticity in aluminium alloy composites

Mishra, R. S., Bieler, T. R. & Mukherjee, A. K. Feb 1997 In : Acta Materialia. 45, 2, p. 561-568 8 p.

Research output: Contribution to journalArticle

Superplasticity
Strain rate
Aluminum alloys
Composite materials
Constitutive equations
11 Citations

Shear creep deformation in polysynthetically twinned (PST) Ti-47Al-2Nb-2Cr with 〈110〉 and 〈112〉 orientations

Seo, D. Y., Wu, C. H. & Bieler, T. R. Dec 1997 In : Materials Science and Engineering A. 239-240, 1-2, p. 450-456 7 p.

Research output: Contribution to journalArticle

shear creep
Creep
shear stress
mechanical twinning
activation energy
16 Citations

Some critical aspects of high strain rate superplasticity

Mukherjee, A. K., Mishra, R. S. & Bieler, T. R. 1997 In : Materials Science Forum. 233-234, p. 217-234 18 p.

Research output: Contribution to journalArticle

superplasticity
Superplasticity
strain rate
Strain rate
Aluminum
1996
8 Citations

Cavitation in the neck of a deformed Ti-47Al-2Nb-2Cr creep specimen

Sneary, P. R., Beals, R. S. & Bieler, T. R. May 15 1996 In : Scripta Materialia. 34, 10, p. 1647-1654 8 p.

Research output: Contribution to journalArticle

cavitation flow
strain rate
grain boundaries
nucleation
12 Citations

High-strain-rate superplasticity in aluminum-matrix composites

Bieler, T. R., Mishra, R. S. & Mukherjee, A. K. Feb 1996 In : JOM. 48, 2, p. 52-57 6 p.

Research output: Contribution to journalArticle

Superplasticity
Aluminum
strain rate
Strain rate
manufacturing
12 Citations

Influence of temperature on segregation in 2009 Al-SiCw composite and its implication on high strain rate superplasticity

Mishra, R. S., Echer, C., Bampton, C. C., Bieler, T. R. & Mukherjee, A. K. Jul 15 1996 In : Scripta Materialia. 35, 2, p. 247-252 6 p.

Research output: Contribution to journalArticle

Crystal whiskers
Thermomechanical treatment
Superplasticity
Silicon carbide
Thermal effects