A comparison of the microstructure and creep behavior of cold rolled HAYNES® 230 alloy™ and HAYNES® 282 alloy™

C. J. Boehlert, S. C. Longanbach

    Research output: Research - peer-reviewArticle

    • 15 Citations

    Abstract

    HAYNES 282 and HAYNES 230 nickel-based superalloys were subjected to cold rolling deformation and heat treatments in order to investigate processing-microstructure-property relationships to understand the effects of thermomechanical processing on their microstructure and tensile-creep behavior. The sheet materials underwent four cycles of 20% reduction in thickness followed by a solution treatment. The resultant microstructures were characterized using electron backscattered diffraction and electron microscopy, and the high-temperature (973-1088. K (700-815 °C)) creep and fatigue behavior was evaluated and compared to the commercially available sheet alloys. The thermomechanical processing treatments did not significantly affect the grain boundary character distribution and almost half of all the boundaries in the microstructures were twin boundaries. The creep resistance was shown to degrade with the additional thermomechanical treatments, which resulted in finer equiaxed grain sizes. The HAYNES 282 alloy was shown to be significantly more creep resistant than the HAYNES 230 alloy. The fatigue behavior indicated that creep ratcheting occurred more prominently in the HAYNES 230 alloy than in the HAYNES 282 alloy and this was explained to be a result of the superior creep resistance exhibited by the HAYNES 282 alloy. Overall, this study suggests that additional energy-intensive processing treatments, beyond those involved in the commercially available sheet products, may not be beneficial for additional creep resistance.

    LanguageEnglish (US)
    Pages4888-4898
    Number of pages11
    JournalMaterials Science and Engineering A
    Volume528
    Issue number15
    DOIs
    StatePublished - Jun 15 2011

    Profile

    Creep
    Microstructure
    microstructure
    Processing
    Creep resistance
    creep strength
    Fatigue of materials
    Thermomechanical treatment
    Cold rolling
    Nickel
    Superalloys
    Electron diffraction
    Electron microscopy
    Grain boundaries
    Heat treatment
    Temperature
    tensile creep
    thermomechanical treatment
    cold rolling
    heat resistant alloys

    Keywords

    • Creep
    • Electron backscattered diffraction
    • Microstructure
    • Superalloy

    ASJC Scopus subject areas

    • Materials Science(all)
    • Condensed Matter Physics
    • Mechanical Engineering
    • Mechanics of Materials

    Cite this

    A comparison of the microstructure and creep behavior of cold rolled HAYNES® 230 alloy™ and HAYNES® 282 alloy™. / Boehlert, C. J.; Longanbach, S. C.

    In: Materials Science and Engineering A, Vol. 528, No. 15, 15.06.2011, p. 4888-4898.

    Research output: Research - peer-reviewArticle

    @article{b67e67eca92043cd8f33d48642435050,
    title = "A comparison of the microstructure and creep behavior of cold rolled HAYNES® 230 alloy™ and HAYNES® 282 alloy™",
    abstract = "HAYNES 282 and HAYNES 230 nickel-based superalloys were subjected to cold rolling deformation and heat treatments in order to investigate processing-microstructure-property relationships to understand the effects of thermomechanical processing on their microstructure and tensile-creep behavior. The sheet materials underwent four cycles of 20% reduction in thickness followed by a solution treatment. The resultant microstructures were characterized using electron backscattered diffraction and electron microscopy, and the high-temperature (973-1088. K (700-815 °C)) creep and fatigue behavior was evaluated and compared to the commercially available sheet alloys. The thermomechanical processing treatments did not significantly affect the grain boundary character distribution and almost half of all the boundaries in the microstructures were twin boundaries. The creep resistance was shown to degrade with the additional thermomechanical treatments, which resulted in finer equiaxed grain sizes. The HAYNES 282 alloy was shown to be significantly more creep resistant than the HAYNES 230 alloy. The fatigue behavior indicated that creep ratcheting occurred more prominently in the HAYNES 230 alloy than in the HAYNES 282 alloy and this was explained to be a result of the superior creep resistance exhibited by the HAYNES 282 alloy. Overall, this study suggests that additional energy-intensive processing treatments, beyond those involved in the commercially available sheet products, may not be beneficial for additional creep resistance.",
    keywords = "Creep, Electron backscattered diffraction, Microstructure, Superalloy",
    author = "Boehlert, {C. J.} and Longanbach, {S. C.}",
    year = "2011",
    month = "6",
    doi = "10.1016/j.msea.2011.03.019",
    volume = "528",
    pages = "4888--4898",
    journal = "Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing",
    issn = "0921-5093",
    publisher = "Elsevier BV",
    number = "15",

    }

    TY - JOUR

    T1 - A comparison of the microstructure and creep behavior of cold rolled HAYNES® 230 alloy™ and HAYNES® 282 alloy™

    AU - Boehlert,C. J.

    AU - Longanbach,S. C.

    PY - 2011/6/15

    Y1 - 2011/6/15

    N2 - HAYNES 282 and HAYNES 230 nickel-based superalloys were subjected to cold rolling deformation and heat treatments in order to investigate processing-microstructure-property relationships to understand the effects of thermomechanical processing on their microstructure and tensile-creep behavior. The sheet materials underwent four cycles of 20% reduction in thickness followed by a solution treatment. The resultant microstructures were characterized using electron backscattered diffraction and electron microscopy, and the high-temperature (973-1088. K (700-815 °C)) creep and fatigue behavior was evaluated and compared to the commercially available sheet alloys. The thermomechanical processing treatments did not significantly affect the grain boundary character distribution and almost half of all the boundaries in the microstructures were twin boundaries. The creep resistance was shown to degrade with the additional thermomechanical treatments, which resulted in finer equiaxed grain sizes. The HAYNES 282 alloy was shown to be significantly more creep resistant than the HAYNES 230 alloy. The fatigue behavior indicated that creep ratcheting occurred more prominently in the HAYNES 230 alloy than in the HAYNES 282 alloy and this was explained to be a result of the superior creep resistance exhibited by the HAYNES 282 alloy. Overall, this study suggests that additional energy-intensive processing treatments, beyond those involved in the commercially available sheet products, may not be beneficial for additional creep resistance.

    AB - HAYNES 282 and HAYNES 230 nickel-based superalloys were subjected to cold rolling deformation and heat treatments in order to investigate processing-microstructure-property relationships to understand the effects of thermomechanical processing on their microstructure and tensile-creep behavior. The sheet materials underwent four cycles of 20% reduction in thickness followed by a solution treatment. The resultant microstructures were characterized using electron backscattered diffraction and electron microscopy, and the high-temperature (973-1088. K (700-815 °C)) creep and fatigue behavior was evaluated and compared to the commercially available sheet alloys. The thermomechanical processing treatments did not significantly affect the grain boundary character distribution and almost half of all the boundaries in the microstructures were twin boundaries. The creep resistance was shown to degrade with the additional thermomechanical treatments, which resulted in finer equiaxed grain sizes. The HAYNES 282 alloy was shown to be significantly more creep resistant than the HAYNES 230 alloy. The fatigue behavior indicated that creep ratcheting occurred more prominently in the HAYNES 230 alloy than in the HAYNES 282 alloy and this was explained to be a result of the superior creep resistance exhibited by the HAYNES 282 alloy. Overall, this study suggests that additional energy-intensive processing treatments, beyond those involved in the commercially available sheet products, may not be beneficial for additional creep resistance.

    KW - Creep

    KW - Electron backscattered diffraction

    KW - Microstructure

    KW - Superalloy

    UR - http://www.scopus.com/inward/record.url?scp=79955033748&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=79955033748&partnerID=8YFLogxK

    U2 - 10.1016/j.msea.2011.03.019

    DO - 10.1016/j.msea.2011.03.019

    M3 - Article

    VL - 528

    SP - 4888

    EP - 4898

    JO - Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

    T2 - Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

    JF - Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

    SN - 0921-5093

    IS - 15

    ER -