Impedance spectroscopy as a tool for chemical and electrochemical analysis of mixed conductors: A case study of ceria

Wei Lai, Sossina M. Haile

Research output: Contribution to journalArticle

  • 186 Citations

Abstract

The AC impedance response of mixed ionic and electronic conductors (MIECs) is derived from first principles and quantitatively compared with experimental data. While the approach is not entirely new, the derivation is provided in a unified and comprehensive manner. Using Sm0.15Ce0.85O1.925-δ with Pt electrodes as a model system, a broad spectrum of electrical and thermodynamic properties is extracted solely from the measurement of impedance spectra over wide oxygen partial pressure and temperature ranges. Here, the oxygen partial pressure was varied from air [po2=0.21 atm] to H2 [po2=10-31 atm], and the temperature was varied from 500° to 650°C. It was essential for this analysis that the material under investigation exhibit, under some conditions, purely ionic behavior and, under others, mixed conducting behavior. The transition from ionic to mixed conducting behavior is recognizable not only from the oxygen partial pressure dependence of the total conductivity but also directly from the shape of the impedance spectra. Within the electrolytic regime, the impedance spectra (presented in Nyquist form) take the shape of simple, depressed arcs, whereas within the mixed conducting regime (under reducing conditions), the spectra exhibit the features associated with a half tear-drop-shaped element. Parameters derived from quantitative fitting of the impedance spectra include the concentration of free electron carriers, the mobilities and activation energies for both ion and electron transport, the electrolytic domain boundary, and the entropy and enthalpy of reduction. In addition, the electrochemical behavior of O2 and H2 at the Ptceria interface has been characterized from these measurements. Under oxidizing conditions, the data suggest an oxygen electrochemical reaction that is rate limited by the dissociated adsorptiondiffusion of oxygen species on the Pt electrode, similar to PtYSZ (yttria-stabilized zirconia). Under reducing conditions, the inverse of the electrode resistivity obeys adependence, with an activation energy that is similar to that measured for the electronic conductivity. These results suggest that ceria is electrochemically active for hydrogen electro-oxidation and that the reaction is limited by the rate of removal of electrons from the ceria surface.

Original languageEnglish (US)
Pages (from-to)2979-2997
Number of pages19
JournalJournal of the American Ceramic Society
Volume88
Issue number11
DOIs
StatePublished - Nov 2005
Externally publishedYes

Profile

Oxygen
oxygen
Inhibins
Autoradiography
Cyclic P-Oxides
Cerium compounds
Partial pressure
Electrodes
partial pressure
electrode
electron
Acetanilides
Buccal Administration
African Swine Fever
Electrons
Activation energy
Temperature
activation energy
conductivity
temperature

ASJC Scopus subject areas

  • Ceramics and Composites

Cite this

Impedance spectroscopy as a tool for chemical and electrochemical analysis of mixed conductors : A case study of ceria. / Lai, Wei; Haile, Sossina M.

In: Journal of the American Ceramic Society, Vol. 88, No. 11, 11.2005, p. 2979-2997.

Research output: Contribution to journalArticle

Lai, Wei; Haile, Sossina M. / Impedance spectroscopy as a tool for chemical and electrochemical analysis of mixed conductors : A case study of ceria.

In: Journal of the American Ceramic Society, Vol. 88, No. 11, 11.2005, p. 2979-2997.

Research output: Contribution to journalArticle

@article{356a19faf9ef4e55979bd08f48f3023f,
title = "Impedance spectroscopy as a tool for chemical and electrochemical analysis of mixed conductors: A case study of ceria",
abstract = "The AC impedance response of mixed ionic and electronic conductors (MIECs) is derived from first principles and quantitatively compared with experimental data. While the approach is not entirely new, the derivation is provided in a unified and comprehensive manner. Using Sm0.15Ce0.85O1.925-δ with Pt electrodes as a model system, a broad spectrum of electrical and thermodynamic properties is extracted solely from the measurement of impedance spectra over wide oxygen partial pressure and temperature ranges. Here, the oxygen partial pressure was varied from air [po2=0.21 atm] to H2 [po2=10-31 atm], and the temperature was varied from 500° to 650°C. It was essential for this analysis that the material under investigation exhibit, under some conditions, purely ionic behavior and, under others, mixed conducting behavior. The transition from ionic to mixed conducting behavior is recognizable not only from the oxygen partial pressure dependence of the total conductivity but also directly from the shape of the impedance spectra. Within the electrolytic regime, the impedance spectra (presented in Nyquist form) take the shape of simple, depressed arcs, whereas within the mixed conducting regime (under reducing conditions), the spectra exhibit the features associated with a half tear-drop-shaped element. Parameters derived from quantitative fitting of the impedance spectra include the concentration of free electron carriers, the mobilities and activation energies for both ion and electron transport, the electrolytic domain boundary, and the entropy and enthalpy of reduction. In addition, the electrochemical behavior of O2 and H2 at the Ptceria interface has been characterized from these measurements. Under oxidizing conditions, the data suggest an oxygen electrochemical reaction that is rate limited by the dissociated adsorptiondiffusion of oxygen species on the Pt electrode, similar to PtYSZ (yttria-stabilized zirconia). Under reducing conditions, the inverse of the electrode resistivity obeys adependence, with an activation energy that is similar to that measured for the electronic conductivity. These results suggest that ceria is electrochemically active for hydrogen electro-oxidation and that the reaction is limited by the rate of removal of electrons from the ceria surface.",
author = "Wei Lai and Haile, {Sossina M.}",
year = "2005",
month = "11",
doi = "10.1111/j.1551-2916.2005.00740.x",
volume = "88",
pages = "2979--2997",
journal = "Journal of the American Ceramic Society",
issn = "0002-7820",
publisher = "Wiley-Blackwell",
number = "11",

}

TY - JOUR

T1 - Impedance spectroscopy as a tool for chemical and electrochemical analysis of mixed conductors

T2 - Journal of the American Ceramic Society

AU - Lai,Wei

AU - Haile,Sossina M.

PY - 2005/11

Y1 - 2005/11

N2 - The AC impedance response of mixed ionic and electronic conductors (MIECs) is derived from first principles and quantitatively compared with experimental data. While the approach is not entirely new, the derivation is provided in a unified and comprehensive manner. Using Sm0.15Ce0.85O1.925-δ with Pt electrodes as a model system, a broad spectrum of electrical and thermodynamic properties is extracted solely from the measurement of impedance spectra over wide oxygen partial pressure and temperature ranges. Here, the oxygen partial pressure was varied from air [po2=0.21 atm] to H2 [po2=10-31 atm], and the temperature was varied from 500° to 650°C. It was essential for this analysis that the material under investigation exhibit, under some conditions, purely ionic behavior and, under others, mixed conducting behavior. The transition from ionic to mixed conducting behavior is recognizable not only from the oxygen partial pressure dependence of the total conductivity but also directly from the shape of the impedance spectra. Within the electrolytic regime, the impedance spectra (presented in Nyquist form) take the shape of simple, depressed arcs, whereas within the mixed conducting regime (under reducing conditions), the spectra exhibit the features associated with a half tear-drop-shaped element. Parameters derived from quantitative fitting of the impedance spectra include the concentration of free electron carriers, the mobilities and activation energies for both ion and electron transport, the electrolytic domain boundary, and the entropy and enthalpy of reduction. In addition, the electrochemical behavior of O2 and H2 at the Ptceria interface has been characterized from these measurements. Under oxidizing conditions, the data suggest an oxygen electrochemical reaction that is rate limited by the dissociated adsorptiondiffusion of oxygen species on the Pt electrode, similar to PtYSZ (yttria-stabilized zirconia). Under reducing conditions, the inverse of the electrode resistivity obeys adependence, with an activation energy that is similar to that measured for the electronic conductivity. These results suggest that ceria is electrochemically active for hydrogen electro-oxidation and that the reaction is limited by the rate of removal of electrons from the ceria surface.

AB - The AC impedance response of mixed ionic and electronic conductors (MIECs) is derived from first principles and quantitatively compared with experimental data. While the approach is not entirely new, the derivation is provided in a unified and comprehensive manner. Using Sm0.15Ce0.85O1.925-δ with Pt electrodes as a model system, a broad spectrum of electrical and thermodynamic properties is extracted solely from the measurement of impedance spectra over wide oxygen partial pressure and temperature ranges. Here, the oxygen partial pressure was varied from air [po2=0.21 atm] to H2 [po2=10-31 atm], and the temperature was varied from 500° to 650°C. It was essential for this analysis that the material under investigation exhibit, under some conditions, purely ionic behavior and, under others, mixed conducting behavior. The transition from ionic to mixed conducting behavior is recognizable not only from the oxygen partial pressure dependence of the total conductivity but also directly from the shape of the impedance spectra. Within the electrolytic regime, the impedance spectra (presented in Nyquist form) take the shape of simple, depressed arcs, whereas within the mixed conducting regime (under reducing conditions), the spectra exhibit the features associated with a half tear-drop-shaped element. Parameters derived from quantitative fitting of the impedance spectra include the concentration of free electron carriers, the mobilities and activation energies for both ion and electron transport, the electrolytic domain boundary, and the entropy and enthalpy of reduction. In addition, the electrochemical behavior of O2 and H2 at the Ptceria interface has been characterized from these measurements. Under oxidizing conditions, the data suggest an oxygen electrochemical reaction that is rate limited by the dissociated adsorptiondiffusion of oxygen species on the Pt electrode, similar to PtYSZ (yttria-stabilized zirconia). Under reducing conditions, the inverse of the electrode resistivity obeys adependence, with an activation energy that is similar to that measured for the electronic conductivity. These results suggest that ceria is electrochemically active for hydrogen electro-oxidation and that the reaction is limited by the rate of removal of electrons from the ceria surface.

UR - http://www.scopus.com/inward/record.url?scp=33745313696&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33745313696&partnerID=8YFLogxK

U2 - 10.1111/j.1551-2916.2005.00740.x

DO - 10.1111/j.1551-2916.2005.00740.x

M3 - Article

VL - 88

SP - 2979

EP - 2997

JO - Journal of the American Ceramic Society

JF - Journal of the American Ceramic Society

SN - 0002-7820

IS - 11

ER -