Quantitative atomic force microscopy characterization and crystal plasticity finite element modeling of heterogeneous deformation in commercial purity titanium

Research output: Research - peer-reviewArticle

  • 23 Citations

Abstract

Using a four-point bend sample of commercial purity titanium deformed to a surface strain around 1.5 pct, the active dislocation slip and twin systems in a microstructural patch of about 15 grains were quantitatively analyzed by a technique combining atomic force microscopy (AFM), backscattered electron (BSE) imaging, and electron backscattered diffraction (EBSD). Local shear distribution maps derived from z-displacement data measured by AFM were directly compared to results of a crystal plasticity finite element (CPFE) simulation that incorporates a phenomenological model of the deformation processes to evaluate the ability of the CPFE model to match the experimental observations. The CPFE model successfully predicted most types of active dislocation slip systems within the grains at correct magnitudes, but the spatial distribution of strains within grains differed between the measurements and the simulation.

LanguageEnglish (US)
Pages636-644
Number of pages9
JournalMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
Volume42
Issue number3
DOIs
StatePublished - Mar 2011

Profile

plastic properties
purity
titanium
atomic force microscopy
crystals
Titanium
Plasticity
Atomic force microscopy
Crystals
slip
simulation
spatial distribution
electron diffraction
shear
electrons
Dislocations (crystals)
Electron diffraction
Spatial distribution
Imaging techniques
Electrons

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Metals and Alloys
  • Mechanics of Materials

Cite this

@article{bbc04ba454ce42d3ad523abaa0a0247a,
title = "Quantitative atomic force microscopy characterization and crystal plasticity finite element modeling of heterogeneous deformation in commercial purity titanium",
abstract = "Using a four-point bend sample of commercial purity titanium deformed to a surface strain around 1.5 pct, the active dislocation slip and twin systems in a microstructural patch of about 15 grains were quantitatively analyzed by a technique combining atomic force microscopy (AFM), backscattered electron (BSE) imaging, and electron backscattered diffraction (EBSD). Local shear distribution maps derived from z-displacement data measured by AFM were directly compared to results of a crystal plasticity finite element (CPFE) simulation that incorporates a phenomenological model of the deformation processes to evaluate the ability of the CPFE model to match the experimental observations. The CPFE model successfully predicted most types of active dislocation slip systems within the grains at correct magnitudes, but the spatial distribution of strains within grains differed between the measurements and the simulation.",
author = "Y. Yang and L. Wang and Bieler, {T. R.} and P. Eisenlohr and Crimp, {M. A.}",
year = "2011",
month = "3",
doi = "10.1007/s11661-010-0475-0",
volume = "42",
pages = "636--644",
journal = "Metallurgical Transactions A (Physical Metallurgy and Materials Science)",
issn = "1073-5623",
publisher = "Springer Boston",
number = "3",

}

TY - JOUR

T1 - Quantitative atomic force microscopy characterization and crystal plasticity finite element modeling of heterogeneous deformation in commercial purity titanium

AU - Yang,Y.

AU - Wang,L.

AU - Bieler,T. R.

AU - Eisenlohr,P.

AU - Crimp,M. A.

PY - 2011/3

Y1 - 2011/3

N2 - Using a four-point bend sample of commercial purity titanium deformed to a surface strain around 1.5 pct, the active dislocation slip and twin systems in a microstructural patch of about 15 grains were quantitatively analyzed by a technique combining atomic force microscopy (AFM), backscattered electron (BSE) imaging, and electron backscattered diffraction (EBSD). Local shear distribution maps derived from z-displacement data measured by AFM were directly compared to results of a crystal plasticity finite element (CPFE) simulation that incorporates a phenomenological model of the deformation processes to evaluate the ability of the CPFE model to match the experimental observations. The CPFE model successfully predicted most types of active dislocation slip systems within the grains at correct magnitudes, but the spatial distribution of strains within grains differed between the measurements and the simulation.

AB - Using a four-point bend sample of commercial purity titanium deformed to a surface strain around 1.5 pct, the active dislocation slip and twin systems in a microstructural patch of about 15 grains were quantitatively analyzed by a technique combining atomic force microscopy (AFM), backscattered electron (BSE) imaging, and electron backscattered diffraction (EBSD). Local shear distribution maps derived from z-displacement data measured by AFM were directly compared to results of a crystal plasticity finite element (CPFE) simulation that incorporates a phenomenological model of the deformation processes to evaluate the ability of the CPFE model to match the experimental observations. The CPFE model successfully predicted most types of active dislocation slip systems within the grains at correct magnitudes, but the spatial distribution of strains within grains differed between the measurements and the simulation.

UR - http://www.scopus.com/inward/record.url?scp=79951508467&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79951508467&partnerID=8YFLogxK

U2 - 10.1007/s11661-010-0475-0

DO - 10.1007/s11661-010-0475-0

M3 - Article

VL - 42

SP - 636

EP - 644

JO - Metallurgical Transactions A (Physical Metallurgy and Materials Science)

T2 - Metallurgical Transactions A (Physical Metallurgy and Materials Science)

JF - Metallurgical Transactions A (Physical Metallurgy and Materials Science)

SN - 1073-5623

IS - 3

ER -