Slip system analysis in the cold rolling of a Ni3Al single crystal

Masahiko Demura, Dierk Raabe, Franz Roters, Philip Eisenlohr, Ya Xu, Toshiyuki Hirano, Kyosuke Kishida

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The activated slip systems were analyzed in the cold rolling of a Ni3Al single crystal with an initial orientation of ~[-112](512), which showed an irregular rolling deformation, i.e. widening, bending, and shear deformation. A phenomenological crystal plasticity model was applied using a spectral method. The boundary condition was optimized to reproduce the actual rolling deformation, as follows. That is, the orthogonal components of the deformation gradient were given from the measured widening and reduction, and the shear components were iteratively optimized as to that the final orientation was as close to the experimental one as possible. The calculated result showed that three slip systems, a3, b1, and d1 in the Bishop-Hill notation, were mainly activated in the irregular rolling deformation, which result was consistent to the previous observation of the slip traces [Kishida et al., Philos. Mag. 83 (2003) 3029]. The three activated systems were identical to those activated in the plane-strain condition. However, the quantitative comparison revealed that the activity of b1 was significantly reduced in the irregular rolling deformation, while the activity of d1 was enhanced instead. The less activity of b1 and the enhancement of d1 can be understood assuming a strong interaction between a3 and b1. The reaction of this pair has been reported to form the superlattice intrinsic stacking fault (SISF) in Ni3Al [Chiba and Hanada, Philos. Mag. A. 69 (1994) 751]. It is likely that the formation of the SISF, which are considered immobile in Ni3Al, restrained the activation of b1, leading to the irregular rolling deformation.

Original languageEnglish (US)
Title of host publicationMaterials Science Forum
PublisherTrans Tech Publications Ltd
Pages1111-1116
Number of pages6
Volume783-786
ISBN (Print)9783038350736
StatePublished - 2014
Externally publishedYes
Event8th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2013 - Las Vegas, NV, United States

Publication series

NameMaterials Science Forum
Volume783-786
ISSN (Print)02555476

Other

Other8th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2013
CountryUnited States
CityLas Vegas, NV
Period12/2/1312/6/13

Profile

Carbamyl Phosphate
HMGN2 Protein
slip
Erythrocyte Inclusions
Diamines
Stacking faults
Cold rolling
cold rolling
crystal defects
shear
single crystals
Carbamoyl-Phosphate Synthase (Glutamine-Hydrolyzing)
Cholestenones
Protoveratrines
Cape Verde
Cinanserin
Anthralin
Bending (forming)
Differential Scanning Calorimetry
Carcinoid Tumor

Keywords

  • Crystal plasticity
  • Intermetallic
  • Lattice rotation
  • Slip-slip interaction
  • Spectral method

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanical Engineering
  • Mechanics of Materials

Cite this

Demura, M., Raabe, D., Roters, F., Eisenlohr, P., Xu, Y., Hirano, T., & Kishida, K. (2014). Slip system analysis in the cold rolling of a Ni3Al single crystal. In Materials Science Forum (Vol. 783-786, pp. 1111-1116). (Materials Science Forum; Vol. 783-786). Trans Tech Publications Ltd.

Slip system analysis in the cold rolling of a Ni3Al single crystal. / Demura, Masahiko; Raabe, Dierk; Roters, Franz; Eisenlohr, Philip; Xu, Ya; Hirano, Toshiyuki; Kishida, Kyosuke.

Materials Science Forum. Vol. 783-786 Trans Tech Publications Ltd, 2014. p. 1111-1116 (Materials Science Forum; Vol. 783-786).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Demura, M, Raabe, D, Roters, F, Eisenlohr, P, Xu, Y, Hirano, T & Kishida, K 2014, Slip system analysis in the cold rolling of a Ni3Al single crystal. in Materials Science Forum. vol. 783-786, Materials Science Forum, vol. 783-786, Trans Tech Publications Ltd, pp. 1111-1116, 8th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2013, Las Vegas, NV, United States, 2-6 December.
Demura M, Raabe D, Roters F, Eisenlohr P, Xu Y, Hirano T et al. Slip system analysis in the cold rolling of a Ni3Al single crystal. In Materials Science Forum. Vol. 783-786. Trans Tech Publications Ltd. 2014. p. 1111-1116. (Materials Science Forum).

Demura, Masahiko; Raabe, Dierk; Roters, Franz; Eisenlohr, Philip; Xu, Ya; Hirano, Toshiyuki; Kishida, Kyosuke / Slip system analysis in the cold rolling of a Ni3Al single crystal.

Materials Science Forum. Vol. 783-786 Trans Tech Publications Ltd, 2014. p. 1111-1116 (Materials Science Forum; Vol. 783-786).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

@inbook{c86b4f3e286c4a35b0d53f8e282877c0,
title = "Slip system analysis in the cold rolling of a Ni3Al single crystal",
abstract = "The activated slip systems were analyzed in the cold rolling of a Ni3Al single crystal with an initial orientation of ~[-112](512), which showed an irregular rolling deformation, i.e. widening, bending, and shear deformation. A phenomenological crystal plasticity model was applied using a spectral method. The boundary condition was optimized to reproduce the actual rolling deformation, as follows. That is, the orthogonal components of the deformation gradient were given from the measured widening and reduction, and the shear components were iteratively optimized as to that the final orientation was as close to the experimental one as possible. The calculated result showed that three slip systems, a3, b1, and d1 in the Bishop-Hill notation, were mainly activated in the irregular rolling deformation, which result was consistent to the previous observation of the slip traces [Kishida et al., Philos. Mag. 83 (2003) 3029]. The three activated systems were identical to those activated in the plane-strain condition. However, the quantitative comparison revealed that the activity of b1 was significantly reduced in the irregular rolling deformation, while the activity of d1 was enhanced instead. The less activity of b1 and the enhancement of d1 can be understood assuming a strong interaction between a3 and b1. The reaction of this pair has been reported to form the superlattice intrinsic stacking fault (SISF) in Ni3Al [Chiba and Hanada, Philos. Mag. A. 69 (1994) 751]. It is likely that the formation of the SISF, which are considered immobile in Ni3Al, restrained the activation of b1, leading to the irregular rolling deformation.",
keywords = "Crystal plasticity, Intermetallic, Lattice rotation, Slip-slip interaction, Spectral method",
author = "Masahiko Demura and Dierk Raabe and Franz Roters and Philip Eisenlohr and Ya Xu and Toshiyuki Hirano and Kyosuke Kishida",
year = "2014",
isbn = "9783038350736",
volume = "783-786",
series = "Materials Science Forum",
publisher = "Trans Tech Publications Ltd",
pages = "1111--1116",
booktitle = "Materials Science Forum",

}

TY - CHAP

T1 - Slip system analysis in the cold rolling of a Ni3Al single crystal

AU - Demura,Masahiko

AU - Raabe,Dierk

AU - Roters,Franz

AU - Eisenlohr,Philip

AU - Xu,Ya

AU - Hirano,Toshiyuki

AU - Kishida,Kyosuke

PY - 2014

Y1 - 2014

N2 - The activated slip systems were analyzed in the cold rolling of a Ni3Al single crystal with an initial orientation of ~[-112](512), which showed an irregular rolling deformation, i.e. widening, bending, and shear deformation. A phenomenological crystal plasticity model was applied using a spectral method. The boundary condition was optimized to reproduce the actual rolling deformation, as follows. That is, the orthogonal components of the deformation gradient were given from the measured widening and reduction, and the shear components were iteratively optimized as to that the final orientation was as close to the experimental one as possible. The calculated result showed that three slip systems, a3, b1, and d1 in the Bishop-Hill notation, were mainly activated in the irregular rolling deformation, which result was consistent to the previous observation of the slip traces [Kishida et al., Philos. Mag. 83 (2003) 3029]. The three activated systems were identical to those activated in the plane-strain condition. However, the quantitative comparison revealed that the activity of b1 was significantly reduced in the irregular rolling deformation, while the activity of d1 was enhanced instead. The less activity of b1 and the enhancement of d1 can be understood assuming a strong interaction between a3 and b1. The reaction of this pair has been reported to form the superlattice intrinsic stacking fault (SISF) in Ni3Al [Chiba and Hanada, Philos. Mag. A. 69 (1994) 751]. It is likely that the formation of the SISF, which are considered immobile in Ni3Al, restrained the activation of b1, leading to the irregular rolling deformation.

AB - The activated slip systems were analyzed in the cold rolling of a Ni3Al single crystal with an initial orientation of ~[-112](512), which showed an irregular rolling deformation, i.e. widening, bending, and shear deformation. A phenomenological crystal plasticity model was applied using a spectral method. The boundary condition was optimized to reproduce the actual rolling deformation, as follows. That is, the orthogonal components of the deformation gradient were given from the measured widening and reduction, and the shear components were iteratively optimized as to that the final orientation was as close to the experimental one as possible. The calculated result showed that three slip systems, a3, b1, and d1 in the Bishop-Hill notation, were mainly activated in the irregular rolling deformation, which result was consistent to the previous observation of the slip traces [Kishida et al., Philos. Mag. 83 (2003) 3029]. The three activated systems were identical to those activated in the plane-strain condition. However, the quantitative comparison revealed that the activity of b1 was significantly reduced in the irregular rolling deformation, while the activity of d1 was enhanced instead. The less activity of b1 and the enhancement of d1 can be understood assuming a strong interaction between a3 and b1. The reaction of this pair has been reported to form the superlattice intrinsic stacking fault (SISF) in Ni3Al [Chiba and Hanada, Philos. Mag. A. 69 (1994) 751]. It is likely that the formation of the SISF, which are considered immobile in Ni3Al, restrained the activation of b1, leading to the irregular rolling deformation.

KW - Crystal plasticity

KW - Intermetallic

KW - Lattice rotation

KW - Slip-slip interaction

KW - Spectral method

UR - http://www.scopus.com/inward/record.url?scp=84904543366&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84904543366&partnerID=8YFLogxK

M3 - Conference contribution

SN - 9783038350736

VL - 783-786

T3 - Materials Science Forum

SP - 1111

EP - 1116

BT - Materials Science Forum

PB - Trans Tech Publications Ltd

ER -