The effect of cold rolling on the grain boundary character and creep rupture properties of INCONEL alloy 718

C. J. Boehlert, S. Civelekoglu, N. Eisinger, G. Smith, J. Crum

Research output: Contribution to journalArticle

Abstract

In order to evaluate the effects of sheet processing on the grain boundary character distribution (GBCD) of INCONEL® alloy 718 (IN 718), electron backscattered diffraction (EBSD) mapping was performed on samples cold rolled between 0-40%. Increased cold rolling increased the fraction of low-angle boundaries at the expense of the coincident site lattice boundaries. The tensile-creep rupture life (Tr) and elongation-to-failure (εf) were evaluated at 649°C and 758MPa, and the data indicated that increased cold rolling significantly increased both the Tr and εf values. In addition the GBCD and room-temperature (RT) tensile properties were evaluated for superplastically formed INCONEL® alloy 718 (IN 718SPF). The tensile results indicated the exceptional strength of the fine-grained IN 718SPF material, however the GBCD parameters were intermediate to those of the 10% and 20% cold rolled IN 718 materials.

Original languageEnglish (US)
Pages (from-to)761-766
Number of pages6
JournalMaterials Science Forum
Volume426-432
Issue number1
StatePublished - 2003
Externally publishedYes

Profile

Grain boundaries
grain boundaries
Diamines
Cold rolling
cold rolling
Traffic Accidents
Creep
Acetanilides
Hereditary Corneal Dystrophies
Acriflavine
Accessory Nerve
Learned Helplessness
Electron diffraction
Epinephrine
Tensile properties
Elongation
Temperature
tensile creep
tensile properties
elongation

Keywords

  • Creep
  • Electron backscatter diffraction
  • Microstructure
  • Superalloy

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

The effect of cold rolling on the grain boundary character and creep rupture properties of INCONEL alloy 718. / Boehlert, C. J.; Civelekoglu, S.; Eisinger, N.; Smith, G.; Crum, J.

In: Materials Science Forum, Vol. 426-432, No. 1, 2003, p. 761-766.

Research output: Contribution to journalArticle

Boehlert, C. J.; Civelekoglu, S.; Eisinger, N.; Smith, G.; Crum, J. / The effect of cold rolling on the grain boundary character and creep rupture properties of INCONEL alloy 718.

In: Materials Science Forum, Vol. 426-432, No. 1, 2003, p. 761-766.

Research output: Contribution to journalArticle

@article{b17470350b7146ba977faff07d0473a7,
title = "The effect of cold rolling on the grain boundary character and creep rupture properties of INCONEL alloy 718",
abstract = "In order to evaluate the effects of sheet processing on the grain boundary character distribution (GBCD) of INCONEL® alloy 718 (IN 718), electron backscattered diffraction (EBSD) mapping was performed on samples cold rolled between 0-40%. Increased cold rolling increased the fraction of low-angle boundaries at the expense of the coincident site lattice boundaries. The tensile-creep rupture life (Tr) and elongation-to-failure (εf) were evaluated at 649°C and 758MPa, and the data indicated that increased cold rolling significantly increased both the Tr and εf values. In addition the GBCD and room-temperature (RT) tensile properties were evaluated for superplastically formed INCONEL® alloy 718 (IN 718SPF). The tensile results indicated the exceptional strength of the fine-grained IN 718SPF material, however the GBCD parameters were intermediate to those of the 10% and 20% cold rolled IN 718 materials.",
keywords = "Creep, Electron backscatter diffraction, Microstructure, Superalloy",
author = "Boehlert, {C. J.} and S. Civelekoglu and N. Eisinger and G. Smith and J. Crum",
year = "2003",
volume = "426-432",
pages = "761--766",
journal = "Materials Science Forum",
issn = "0255-5476",
publisher = "Trans Tech Publications",
number = "1",

}

TY - JOUR

T1 - The effect of cold rolling on the grain boundary character and creep rupture properties of INCONEL alloy 718

AU - Boehlert,C. J.

AU - Civelekoglu,S.

AU - Eisinger,N.

AU - Smith,G.

AU - Crum,J.

PY - 2003

Y1 - 2003

N2 - In order to evaluate the effects of sheet processing on the grain boundary character distribution (GBCD) of INCONEL® alloy 718 (IN 718), electron backscattered diffraction (EBSD) mapping was performed on samples cold rolled between 0-40%. Increased cold rolling increased the fraction of low-angle boundaries at the expense of the coincident site lattice boundaries. The tensile-creep rupture life (Tr) and elongation-to-failure (εf) were evaluated at 649°C and 758MPa, and the data indicated that increased cold rolling significantly increased both the Tr and εf values. In addition the GBCD and room-temperature (RT) tensile properties were evaluated for superplastically formed INCONEL® alloy 718 (IN 718SPF). The tensile results indicated the exceptional strength of the fine-grained IN 718SPF material, however the GBCD parameters were intermediate to those of the 10% and 20% cold rolled IN 718 materials.

AB - In order to evaluate the effects of sheet processing on the grain boundary character distribution (GBCD) of INCONEL® alloy 718 (IN 718), electron backscattered diffraction (EBSD) mapping was performed on samples cold rolled between 0-40%. Increased cold rolling increased the fraction of low-angle boundaries at the expense of the coincident site lattice boundaries. The tensile-creep rupture life (Tr) and elongation-to-failure (εf) were evaluated at 649°C and 758MPa, and the data indicated that increased cold rolling significantly increased both the Tr and εf values. In addition the GBCD and room-temperature (RT) tensile properties were evaluated for superplastically formed INCONEL® alloy 718 (IN 718SPF). The tensile results indicated the exceptional strength of the fine-grained IN 718SPF material, however the GBCD parameters were intermediate to those of the 10% and 20% cold rolled IN 718 materials.

KW - Creep

KW - Electron backscatter diffraction

KW - Microstructure

KW - Superalloy

UR - http://www.scopus.com/inward/record.url?scp=0038002230&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0038002230&partnerID=8YFLogxK

M3 - Article

VL - 426-432

SP - 761

EP - 766

JO - Materials Science Forum

T2 - Materials Science Forum

JF - Materials Science Forum

SN - 0255-5476

IS - 1

ER -